Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- GLASS POLISHING COMPOUND POLISHING SOLUTION
- Product Code
- 14003 to 140006 and 14053 to 14056, 21002, 21003, 21005, 23005, 28002, 28003, 28004, 25022, 25024, 25026
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Glass polishing / Glass clean-up
Manufacturers & Suppliers
Glass Polish Ltd
manufacturer
Glass Polish House, Ratoath Road, Hollystown, D15 E2FP, Ireland
Emergency Contacts
Emergency Contact
00353 1809 7733
Emergency Contact
0044 800324 7937
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air. If signs/symptoms develop, get medical attention.
Wash affected area with soap and water. If signs/symptoms develop, get medical attention.
Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.
Do not induce vomiting. Give victim two glasses of water. Never give anything by mouth to an unconscious person. Get immediate medical attention.
Immediate Medical Attention
Get immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Material will not burn.
Not applicable.
Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA).
Firefighter Protection
Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel.
For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water.
For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water.
Clean up residue with detergent and water.
Materials: detergent and water
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Avoid breathing of vapors, mists or spray. For industrial or professional use only.
Store under normal warehouse conditions.
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits and/or control dust, fume, or airborne particles. If ventilation is not adequate, use respiratory protection equipment.
Gloves not normally required.
Safety Glasses with side shields.
Half facepiece or full facepiece air-purifying respirator suitable for particulates.
Avoid prolonged or repeated skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
Hazardous polymerization will not occur.
None known
None known
None known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste product in a facility permitted to accept chemical waste. As a disposal alternative, incinerate in an industrial or commercial facility in the presence of a combustible material.
Dispose of waste product in a facility permitted to accept chemical waste.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Label Version Number: 01.00. Symbol(s): None. Risk Phrases: None. Safety Phrases: S24/25 Avoid contact with the skin and eyes. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28A After contact with skin, wash immediately with plenty of soap and water. Disclosable Ingredients: No ingredients required on the label.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for GLASS POLISHING COMPOUND POLISHING SOLUTION?
The signal word is warning.
What is the physical form of GLASS POLISHING COMPOUND POLISHING SOLUTION?
GLASS POLISHING COMPOUND POLISHING SOLUTION is a liquid appearing as tan liquid, no odor with tan color. It has no odor odor.
What is GLASS POLISHING COMPOUND POLISHING SOLUTION used for?
Glass polishing / Glass clean-up
What are the hazard statements for GLASS POLISHING COMPOUND POLISHING SOLUTION?
This substance has 2 hazard statements:
- H315: Causes skin irritation
- H319: Causes eye irritation
What is the melting point of GLASS POLISHING COMPOUND POLISHING SOLUTION?
The melting point is Not Applicable and the boiling point is 212 °F / 100°C.