SILVERSHINE 412 Aluminium Paste

If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.

Wash off immediately with soap and plenty of water.

Immediately flush eye(s) with plenty of water. Flush eyes with water as a precaution. Remove contact lenses. Keep eye wide open while rinsing.

Keep respiratory tract clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.

Dry sand, Special powder against metal fire

Water, Foam, ABC powder, Carbon dioxide (CO2)

Do not allow run-off from fire fighting to enter drains or water courses.

Evacuate personnel to safe areas.

The product should not be allowed to enter drains, water courses or the soil.

Use mechanical handling equipment. Soak up with inert absorbent material.

Materials: sand, silica gel, acid binder, universal binder, sawdust

Keep away from heat and sources of ignition. Avoid dust formation. Ensure adequate ventilation. Avoid formation of respirable particles. Do not breathe vapours/dust. Avoid exposure - obtain special instructions before use. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area.

Store in original container. Keep containers tightly closed in a cool, well-ventilated place. Keep container closed when not in use. Keep away from sources of ignition - No smoking. Keep container tightly closed in a dry and well-ventilated place. Protect from humidity and water. Do not allow to dry.

Wash hands before breaks and at the end of workday. Smoking, eating and drinking should be prohibited in the application area.

Keep away from open flames, hot surfaces and sources of ignition. Earthing of containers and apparatuses is essential.

Solvent-resistant gloves. Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact). The exact break through time can be obtained from the protective glove producer and this has to be observed. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. Recommended preventive skin protection. Skin should be washed after contact. The suitability for a specific workplace should be discussed with the producers of the protective gloves.

Safety glasses

Use suitable breathing protection if workplace concentration requires.

Long sleeved clothing, Safety shoes. Choose body protection according to the amount and concentration of the dangerous substance at the work place.

No decomposition if stored and applied as directed.

No decomposition if stored and applied as directed.

Reacts with alkalis, acids, halogenes and oxidizing agents. Contact with acids and alkalis may release hydrogen. Mixture reacts slowly with water resulting in evolution of hydrogen. Vapour/air-mixtures are explosive at intense warming. Stable under recommended storage conditions.

Do not allow to dry. No data available

Acids Bases Oxidizing agents Highly halogenated compounds

This information is not available.

Send to a licensed waste management company. In accordance with local and national regulations.

The product should not be allowed to enter drains, water courses or the soil. Do not contaminate ponds, waterways or ditches with chemical or used container.

For single packagings <=5L / 5 kg, or combination packagings containing inner packagings <= 5L / 5 kg net per inner packaging, SV375 ADR may be applied.

For single packagings <=5L / 5 kg, or combination packagings containing inner packagings <= 5L / 5 kg net per inner packaging, 2.10.2.7 IMDG-Code may be applied.

For single packagings <=5L / 5 kg, or combination packagings containing inner packagings <= 5L / 5 kg net per inner packaging, A197 IATA-DGR may be applied.