Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ALUMINIUM PASTE WITH WHITE SPIRIT
- Product Code
- Metana 125NL, 2565NL, 6565NL, 6180NL, 8565NL, 16NL
Regulatory Identifiers
- CAS Number
- 7429-90-5, 67701-06-8 Check regulations →
- EC Number
- 231-072-3, 919-857-5, 266-930-6 Check regulations →
- REACH No.
- 01-2119529243-45-0160, 01-2119463258-33
Identified Uses
Rub resistant undercoats, industrial coatings providing protection against corrosion, pigments.
Manufacturers & Suppliers
U.S. Metal Powders Inc.
manufacturer
408 U.S. Highway 202, Flemington, NJ 08822, U.S.A.
908-782-5454
Emergency Contacts
Chemtrec
703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Aluminium, powder EC: 231-072-3 | 7429-90-5 | 63 - 67% | Yes |
| Dearomatized white spirit EC: 919-857-5 | --- | 33 - 37% | Yes |
| Oleic acid EC: 266-930-6 | 67701-06-8 | 3% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air and if discomfort persists seek medical advice. In extreme cases if breathing has stopped use artificial respiration. If breathing is difficult, give oxygen
Generally the product does not irritate the skin. But as a precaution remove any soiled clothing, wash affected areas with plenty of water and soap.
Symptoms: Generally the product does not irritate the skin.
Flush immediately with copious amounts of water for at least 15 minutes. Eyelids to be held open. If irritation persists seek medical advice.
Symptoms: Irritation
Inapplicable (Solid, chemical mixture)
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry sand
DO NOT USE WATER
Product is not explosive but explosive air / vapor combinations are possible. Moisture mixed with air causes explosion risk. Also in poorly ventilated areas where solvent concentrations can build up.
Firefighter Protection
Respiratory protective device. Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid eye and skin contact. Evacuate area of non-essential personnel and shut off all sources of ignition.
Do not allow product to reach sewage system or any watercourse and inform respective authorities in case of such seepage.
transfer spill material to a leak proof container suitable for disposal in accordance with local regulations. Never flush with water or aqueous cleaning agent and avoid dust during the clean- up operation.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Instruct the personnel regarding the products properties and the necessary measures that must be taken in case of accidents. Products are inflammable. Avoid the formation of explosive vapor of white spirit, dusts of aluminium. Handle the product in accordance with the requirements of health and security to the place of labor. Wash hands soon after handling products. Wash individual protective equipment which has been contaminated, before utilization. Don't breathe the dust and vapor of solvent; use respiratory protective mask. Avoid direct contact of products with the skin. Remove all sources of ignition. Forbid smoking. Avoid electrostatic charge. Please avoid excess impact/vibration, turning-over, rolling-over and dropping.
Store in a cool and dry place, away from heat, source of fire, oxidizers, acidic substances and flammable materials. Keep tightly closed. Protect from humidity and water. Store indoors keeping away from direct sunshine or heat source, at temperatures between 10 and 30 °C.
Wash hands soon after handling products. Wash individual protective equipment which has been contaminated, before utilization.
Remove all sources of ignition. Forbid smoking. Avoid electrostatic charge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable in normal conditions.
With prolonged water contact and in conditions of increased temperature it is possible for the reaction produced with water and diffused hydrogen to be extremely inflammable
Heat, flame and sparks
Acids, alkalis, oxidants agents, halogens, halogenated compounds.
Toxic fumes of aluminium oxide and/or carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1325
- Shipping Name
- Aluminium paste
- Transport Class
- 4.1.
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ALUMINIUM PASTE WITH WHITE SPIRIT?
The signal word is danger.
What is the physical form of ALUMINIUM PASTE WITH WHITE SPIRIT?
ALUMINIUM PASTE WITH WHITE SPIRIT is a solid (paste) appearing as solid (paste) with grey - silvery color. It has characteristic odor.
What is ALUMINIUM PASTE WITH WHITE SPIRIT used for?
Rub resistant undercoats, industrial coatings providing protection against corrosion, pigments.
What are the hazard statements for ALUMINIUM PASTE WITH WHITE SPIRIT?
This substance has 1 hazard statement:
- H228: Flammable solid.
What is the melting point of ALUMINIUM PASTE WITH WHITE SPIRIT?
The melting point is 660°C (Aluminium, powder); ≤ -20 ℃ (White spirit) and the boiling point is 2467ºC (Aluminium, powder); ≥ 150 °C (ASTM D 86) (White spirit).