GG440/880 n.l. Aluminium Paste

If unconscious place in recovery position and seek medical advice. If symptoms persist, call a physician.

If on skin, rinse well with water. If on clothes, remove clothes. Wash off immediately with soap and plenty of water.

Flush eyes with water as a precaution. Remove contact lenses. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist. Immediately flush eye(s) with plenty of water.

Keep respiratory tract clear. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.

Dry sand, Special powder against metal fire

ABC powder, Carbon dioxide (CO2), Water, Foam media

Standard procedure for chemical fires. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Avoid dust formation. Remove all sources of ignition. Evacuate personnel to safe areas. Use personal protective equipment.

Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.

Do not flush with water. Keep in suitable, closed containers for disposal. Use mechanical handling equipment. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Dispose of rinse water in accordance with local and national regulations.

Keep container tightly closed in a dry and well ventilated place. Store in original container. Keep in a cool, well-ventilated place.

Wash hands before breaks and at the end of workday.

Keep away from open flames, hot surfaces and sources of fire and ignition.

Material : Solvent-resistant gloves (butyl-rubber) Remarks : The suitability for a specific workplace should be discussed with the producers of the protective gloves. Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact). The exact break through time can be obtained from the protective glove producer and this has to be observed. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time.

Eye wash bottle with pure water : Goggles

Use suitable breathing protection if workplace concentration requires.

Choose body protection according to the amount and concentration of the dangerous substance at the work place.

Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities. The product should not be allowed to enter drains, water courses or the soil.

No decomposition if stored and applied as directed.

No decomposition if stored and applied as directed.

Contact with acids and alkalis may release hydrogen.

Heat, flames and sparks. Do not allow evapouration to dryness.

acids and alkalis

no data available

IMDG Code segregation group 15 - Powdered metals