Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SAS591
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive.
Manufacturers & Suppliers
Van Line Ltd
1 Harker Way, Leeds, LS9 0DY, England
Emergency Contacts
Emergency Contact
+44 (0)113 213 4300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product is comprised of a sealant in an integral container with propellant.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethyl Triacetoxysilane | 17689-77-9 | 5 - 10% | Yes |
| 1,1,1,2-TETRAFLUOROETHANE | 811-97-2 | 5 - 6% | No |
Notes
This product does not contain any hazardous ingredients, or ingredients with national workplace exposure limits. The product is comprised of a sealant in an integral container with propellant. The propellant remains within the can and is not extruded during normal use of the product. There is 5-6% propellant per 200ml of product.
First Aid Measures
Emergency procedures for chemical exposure incidents
Get medical attention. Move affected person to fresh air at once.
Wash skin thoroughly with soap and water. Get medical attention if symptoms are severe or persist after washing.
Rinse immediately with plenty of water. Continue to rinse for at least 15 minutes.
Rinse mouth thoroughly with water. Do not induce vomiting. Get medical attention.
Immediate Medical Attention
Get medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire-extinguishing media suitable for the surrounding fire.
Containers close to fire should be removed or cooled with water.
Firefighter Protection
Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective clothing as described in Section 8 of this safety data sheet.
Do not discharge into drains or watercourses or onto the ground.
Absorb spillage with sand or other inert absorbent. Collect and place in suitable waste disposal containers and seal securely.
Materials: sand or other inert absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For personal protection, see Section 8.
Store in tightly-closed, original container in a dry, cool and well-ventilated place. Keep container tightly closed. Protect from sunlight.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear protective gloves.
Wear eye protection.
Respiratory protection not required.
Wear protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal ambient temperatures and when used as recommended.
There are no known reactivity hazards associated with this product.
Under normal conditions of storage and use, no hazardous reactions will occur.
Avoid heat.
Strong oxidising agents.
Formaldehyde
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste product or used containers in accordance with local regulations
Dispose of waste product or used containers in accordance with local regulations
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Regulation (EC) No 1907/2006 (REACH) and Regulation (EC) No 1272/2008 (CLP) with amendments.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SAS591?
The signal word is danger.
What is the physical form of SAS591?
SAS591 is a paste appearing as paste with black color. It has acetic acid odor.
What is the solubility of SAS591?
Not available
What is SAS591 used for?
Adhesive.
What are the hazard statements for SAS591?
This substance has 2 hazard statements:
- H229: Pressurised container: may burst if heated.
- H314: Causes severe skin burns and eye damage.
What is the melting point of SAS591?
The melting point is Not available and the boiling point is Not available.