Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SampleKwick Hardener
- Product Code
- AGB8786H
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Mounting material for metallographic specimens
Uses advised against
None known.
Manufacturers & Suppliers
Agar Scientific Ltd
Parsonage Lane Stansted CM24 8GF United Kingdom
+44 (0) 1279 813 519
Emergency Contacts
Emergency Contact
+44 (0)1856 407333
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Isobutyl methacrylate EC: 202-613-0 | 97-86-9 | 83% | Yes |
| propylidynetrimethyl trimethacrylate EC: 221-950-4 | 3290-92-4 | 14% | Yes |
| N,N-DIMETHYL-P-TOLUIDINE EC: 202-805-4 | 99-97-8 | 3% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. Ensure supply of fresh air. In the event of symptoms seek for medical treatment.
Symptoms: No adverse effects are anticipated from inhalation.
Wash with water and soap and rinse thoroughly. In case of contact with skin wash off immediately with soap and water. Consult a doctor if skin irritation persists.
Rinse opened eye under running water. If symptoms persist, consult a doctor. Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Call for a doctor immediately. Consult a doctor immediately. Do not induce vomiting. Rinse out mouth and give plenty of water to drink.
Immediate Medical Attention
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident. In the event of symptoms seek for medical treatment. Consult a doctor if skin irritation persists. If symptoms persist, consult a doctor. If eye irritation persists: Get medical advice/attention. Call for a doctor immediately. Consult a doctor immediately. Treat simptomatically.
Medical Treatment
Treat simptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation at workstation.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Butyl rubber, >480 min (EN 374). The details concerned are recommendations. Please contact the glove supplier for further information. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles. Safety glasses
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Breathing apparatus in the event of high concentrations. Short term: filter apparatus, combination filter A-P2.
Light protective clothing of plastic material.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1866
- Shipping Name
- RESIN SOLUTION
- Transport Class
- 3 Flammable liquids.
- Packing Group
- III
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SampleKwick Hardener?
The signal word is warning.
What is the physical form of SampleKwick Hardener?
SampleKwick Hardener is a liquid appearing as liquid with not determined. color. It has characteristic odor.
What is SampleKwick Hardener used for?
Mounting material for metallographic specimens
What are the hazard statements for SampleKwick Hardener?
This substance has 8 hazard statements:
- H226: Flammable liquid and vapour.
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H400: Very toxic to aquatic life.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of SampleKwick Hardener?
The melting point is Undetermined. and the boiling point is 155.