Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SILIKAL® R 17 Hardener
- Product Code
- R 17 HA
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- WPC0-00NA-900T-TJFQ
Identified Uses
Repair mortar Acrylic resin
Uses advised against
Unsuitable for home DIY applications.
Manufacturers & Suppliers
Silikal GmbH
manufacturer
Ostring 23, D-63533 Mainhausen
+49-6182/9235-0
Emergency Contacts
GBK GmbH
+49 (0)6132-84463
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| methyl methacrylate EC: 201-297-1 | 80-62-6 | 50 - 100% | Yes |
| N-Hydroxyethyl-N-methyl-p-toluidine EC: 220-638-5 | 2842-44-6 | 0.5 - 2.5% | Yes |
| tetramethylene dimethacrylate EC: 218-218-1 | 2082-81-7 | 0.5% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air and to be sure call for a doctor.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, Sand, CO2, powder or water spray. Fight larger fire with alcohol resistant foam.
Water with full jet
Exothermic polymerisation.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace.
Store in cool, dry conditions in well sealed receptacles.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation (EN 374). Material of gloves: Butyl rubber, BR. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
Use the indicated respiratory protection if workplace exposure limits are exceeded. Recommended filter device for short term use: Filter A
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
Exothermic polymerisation.
Keep away from heat and direct sunlight.
Reacts with peroxides and other radical forming substances.
Hydrocarbons, Carbon monoxide and carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must be specially treated adhering to official regulations.
Must not be disposed together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1866
- Shipping Name
- RESIN SOLUTION
- Transport Class
- 3
- Packing Group
- II
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SILIKAL® R 17 Hardener?
The signal word is danger.
What is the physical form of SILIKAL® R 17 Hardener?
SILIKAL® R 17 Hardener is a fluid with colourless color. It has unpleasant odor.
What is SILIKAL® R 17 Hardener used for?
Repair mortar Acrylic resin
What are the hazard statements for SILIKAL® R 17 Hardener?
This substance has 4 hazard statements:
- H225: Highly flammable liquid and vapour.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H335: May cause respiratory irritation.
What is the melting point of SILIKAL® R 17 Hardener?
The melting point is Undetermined. and the boiling point is 100 °C.