Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- neoform K plus
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
PC8 Biocidal products (e.g. Disinfectants, pest control), PC35 Washing and cleaning products (including solvent based products)
Manufacturers & Suppliers
Chemische Fabrik Dr. Weigert GmbH & Co. KG
manufacturer
Mühlenhagen 85, D-20539 Hamburg
+49 40 789 60 0
http://www.drweigert.com
Emergency Contacts
GBK/ Infotrac
+1 800 535 5053
GBK/ Infotrac
+1 352 323 3500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS05
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| isotridecanol, ethoxylated | 69011-36-5 | 1 - 10% | Yes |
| Ethanediol EC: 203-473-3 | 107-21-1 | 1 - 10% | Yes |
| Propan-2-ol EC: 200-661-7 | 67-63-0 | 1 - 10% | Yes |
| N-(3-aminopropyl)-N-dodecylpropane-1,3-diamine EC: 219-145-8 | 2372-82-9 | 2% | Yes |
| didecyldimethylammonium chloride EC: 230-525-2 | 7173-51-5 | 10% | Yes |
Complete text of hazard statements in chapter 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Ensure supply of fresh air. In the event of symptoms take medical treatment.
After contact with skin, wash immediately with plenty of water. Consult a doctor if skin irritation persists.
In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. In case of irritation consult an oculist.
Rinse mouth thoroughly with water.
Immediate Medical Attention
In the case of swallowing with subsequent vomiting, aspiration of the lungs can occur which can lead to chemical pneumonia or asphyxiation.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant gloves. For permanent hand contact: neoprene (Material thickness >= 0,65 mm, Breakthrough time > 480 min), nitrile (Material thickness >= 0,4 mm, Breakthrough time > 480 min), butyl (Material thickness >= 0,7 mm, Breakthrough time > 480 min). For short-term hand contact: nitrile (Material thickness >= 0,11 mm). Hand protection must comply with EN 374.
Safety glasses with side protection shield; Eye protection must comply with EN 166.
Not necessary, but do not inhale vapours. If workplace limits are exceeded, a respiratory protection approved for this particular job must be worn.
Clothing as usual in the chemical industry.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1903
- Shipping Name
- DISINFECTANT, LIQUID, CORROSIVE, N.O.S.
- Transport Class
- 8
- Packing Group
- III
See Sections 6 to 8
See Sections 6 to 8
See Sections 6 to 8
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for neoform K plus?
The signal word is danger.
What is the physical form of neoform K plus?
neoform K plus is a liquid with colourless color. It has characteristic odor.
What is the solubility of neoform K plus?
not determined
What is neoform K plus used for?
PC8 Biocidal products (e.g. Disinfectants, pest control), PC35 Washing and cleaning products (including solvent based products)
What are the hazard statements for neoform K plus?
This substance has 4 hazard statements:
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of neoform K plus?
The melting point is not determined and the boiling point is not determined.