Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Fomtec AFFF 6%
- Product Code
- 10-6006-01
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Appliance protection
Uses advised against
None known.
Manufacturers & Suppliers
Dafo Fomtec AB
manufacturer
Box 683, SE-13526 Tyresö, Sweden
+46 8 506 405 00
http://www.fomtec.com
Emergency Contacts
The National Poisons Information Service
111
24 h service
NCEC CareChem24
+44 1273 289451
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
According to REACH Regulation (EC) No 1907/2006, as retained and amended SI 2019/758 and SI 2020/1577
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-(2-butoxyethoxy)ethanol; diethylene glycol monobutyl ether EC: 203-961-6 | 112-34-5 | 3 - 5% | Yes |
| Blend of Fluorinated substances C6(PFAS) | 00-00-0 | 0.3% | No |
| 2-methylpentane-2,4-diol EC: 203-489-0 | 107-41-5 | 0.25% | Yes |
| C6 fluorotelomer-based surfactant | 00-00-0 | 0.25% | Yes |
| ethanediol EC: 203-473-3 | 107-21-1 | 0.25% | Yes |
| methanol EC: 200-659-6 | 67-56-1 | 0.05% | Yes |
Notes
See full text of H-phrases in section 16. Occupational exposure limits are listed in section 8, if these are available. [1] European occupational exposure limit. [3] According to UK REACH, Annex XVII, the substance is subject to restrictions.
First Aid Measures
Emergency procedures for chemical exposure incidents
Upon breathing difficulties or irritation of the respiratory tract: Bring the person into fresh air and stay with him/her.
Upon irritation: rinse with water. In the event of continued irritation, seek medical assistance.
Symptoms: irritation
If in eyes: Flush eyes with water or saline water (20-30 °C) for at least 5 minutes. Remove contact lenses. Seek medical assistance and continue flushing during transport.
If the person is conscious, rinse the mouth with water and stay with the person. Never give the person anything to drink. In case of malaise, seek medical advice immediately and bring the safety data sheet or label from the product. Do not induce vomiting, unless recommended by the doctor. Have the person lean forward with head down to avoid inhalation of or choking on vomited material.
Symptoms: malaise
Immediate Medical Attention
In case of malaise, seek medical advice immediately. Seek medical assistance and continue flushing during transport.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The product is not flammable
Firefighter Protection
Fire fighters should wear appropriate personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation, especially in confined areas. Contaminated areas may be slippery.
Avoid discharge to lakes, streams, sewers, etc.
cleaning should be performed with normal cleaning agents. Avoid use of solvents.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
See section 8 "Exposure controls/personal protection" for information on personal protection.
Dry, cool and well ventilated (< 55 °C)
Smoking, drinking and consumption of food is not allowed in the work area.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Installation of a local exhaust system if normal air flow in the work room is not sufficient is recommended. Ensure eyewash and emergency showers are clearly marked.
Material: Vinyl/PVC, Glove thickness: 0.6 mm
Wear safety glasses with side shields. Standards: EN166
No specific requirements
Dedicated work clothing should be worn.
No specific requirements.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under the conditions, noted in section 7 "Handling and storage".
No data available.
None known.
None known.
Strong acids, strong bases, strong oxidizing agents, and strong reducing agents.
The product is not degraded when used as specified in section 1.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Product is not covered by regulations on dangerous waste.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Fomtec AFFF 6%?
The signal word is no signal word.
What is the physical form of Fomtec AFFF 6%?
Fomtec AFFF 6% is a liquid with pale yellow color. It has characteristic odor.
What is the solubility of Fomtec AFFF 6%?
Completely soluble
What is Fomtec AFFF 6% used for?
Appliance protection
What is the melting point of Fomtec AFFF 6%?
The melting point is ~ -1 °C and the boiling point is Testing not relevant or not possible due to the nature of the product..