Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FORMIC ACID 10% - 78%
- Product Code
- M0027
- Chemical Name
- FORMIC ACID
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Used in the synthesis and/or formulation of industrial products.
Uses advised against
This product is not recommended for any use or sector of use industrial, professional or consume other than those previously listed as 'Intended or identified uses'.
Manufacturers & Suppliers
CHIMITEX S.p.A.
national supplier
Via A. Vespucci, 8 21054 Fagnano Olona (VA)
Emergency Contacts
Emergency Contact
0039 0331 613911
Centro Antiveleni Ospedale Niguarda (MI)
(+39) 0266101029
24/24h
Centro Antiveleni Ospedale S.Martino (GE)
(+39) 010/352808
24/24h
Centro antiveleni - CAV Centro Nazionale di Informazione Tossicologica – Pavia
(+39) 0382 24444
24/24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
formic acid ...%
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| formic acid ... % EC: 200-579-1 | 64-18-6 | 10 - 78% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest.
Symptoms: Inhalation produces burning sensation, coughing, breathlessness and sore throat.
Immediately take off all contaminated clothing. OBTAIN IMMEDIATE MEDICAL ATTENTION. Remove contaminated clothing immediately and dispose off safely. After contact with skin, wash immediately with soap and plenty of water.
Symptoms: Skin contact causes redness, pain and blisters.
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an ophthalmologist immediately. Protect uninjured eye.
Symptoms: Contact with the eyes produces redness, pain and loss of vision.
Do NOT induce vomiting.
Symptoms: If swallowed, may cause abdominal cramps, burning sensation and weakness.
Immediate Medical Attention
OBTAIN IMMEDIATE MEDICAL ATTENTION. After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an ophthalmologist immediately. In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data sheet if possible).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Do not inhale explosion and combustion gases. Burning produces heavy smoke.
Move undamaged containers from immediate hazard area if it can be done safely.
Firefighter Protection
Use suitable breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear personal protection equipment. Remove all sources of ignition. Remove persons to safety. See protective measures under point 7 and 8.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. Retain contaminated washing water and dispose it.
Wash with plenty of water.
Materials: absorbing material, organic, sand
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes, inhalation of vapours and mists. Don't use empty container before they have been cleaned. Before making transfer operations, assure that there aren't any incompatible material residuals in the containers.
Temperature interval : min: 5. °C, max: 40. °C. Keep away from food, drink and feed. Adequately ventilated premises.
Contaminated clothing should be changed before entering eating areas. Do not eat or drink while working.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Neoprene rubber gloves (EN374).
Safety goggles for chemicals, with suitable lateral protection (EN166).
Combined filter mask for gases and vapours (EN14387).
Neoprene rubber boots (EN347). Apron resistant to corrosive products. Clothing resistant to corrosive products.
Prevent uncontrolled penetration on the soil. Because of volatility, emissions to the atmosphere while handling and use may result. Avoid any release into the atmosphere. Emissions from ventilation equipment or work processes should be evaluated to verify compliance with the requirements of the legislation on the prevention of environment. In some cases it will be necessary to use fume scrubbers, filters or modifications in the design of process equipment to reduce emissions to an acceptable level.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Stable under normal conditions
Possible dangerous reaction with oxidizing agents Possible dangerous reaction with alkalis
Keep away from sources of heat. If possible, avoid direct contact with sunlight
Oxidizing agents Alkalis
As consequence of thermal decomposition, hazardous products may be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3412
- Shipping Name
- FORMIC ACID with not less than 10% but not more than 85% acid by mass
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FORMIC ACID 10% - 78%?
The signal word is danger.
What is the physical form of FORMIC ACID 10% - 78%?
FORMIC ACID 10% - 78% is a liquid appearing as liquid colourless with colourless color. It has characteristic odor.
What is FORMIC ACID 10% - 78% used for?
Used in the synthesis and/or formulation of industrial products.
What are the hazard statements for FORMIC ACID 10% - 78%?
This substance has 1 hazard statement:
- H314: Causes severe skin burns and eye damage.
What is the melting point of FORMIC ACID 10% - 78%?
The melting point is Not available and the boiling point is > 100 °C.