Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LGEP 2
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant.
Manufacturers & Suppliers
SKF MPT
national supplier
Meidoornkade 14, 3992 AE, AE Houten
+31 30 6307200
www.skf.com
Emergency Contacts
NHS 111 (Scotland: NHS 24)
111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Phosphorodithioc acid, mixed O,O-bis(2-ethylhexyl and iso-butyl and iso-propyl) esters, zinc salts EC: 288-917-4 | 85940-28-9 | 2.5 - 5% | Yes |
Notes
The mineral oils in the product contain <3% DMSO extract(IP 346).
First Aid Measures
Emergency procedures for chemical exposure incidents
Seek fresh air. Seek medical advice in case of persistent discomfort.
Remove contaminated clothing. Wash skin with soap and water. Seek medical advice in case of persistent discomfort.
Symptoms: slight irritation
Flush with water (preferably using eye wash equipment) until irritation subsides. Seek medical advice if symptoms persist.
Symptoms: slight irritation
Wash out mouth thoroughly and drink 1-2 glasses of water in small sips. Seek medical advice in case of persistent discomfort.
Medical Treatment
Treat symptoms. No special immediate treatment required.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguish with powder, foam or water mist. Use water or water mist to cool non-ignited stock.
Do not use water stream, as it may spread the fire.
Not flammable, but combustible. The product decomposes when combusted and the following toxic gases can be formed: Carbon monoxide and carbon dioxide.
Move containers from danger area if it can be done without risk.
Firefighter Protection
Wear Self-Contained Breathing Apparatus (SCBA) with chemical resistant gloves. Avoid inhalation of vapour and flue gases - seek fresh air.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stay upwind/keep distance from source. Stop leak if this can be done without risk.
Wipe up minor spills with a cloth.
Prevent spillage from entering drains and/or surface water.
Contain and absorb spill with sand or other absorbent material and transfer to suitable waste containers. Wipe up minor spills with a cloth.
Materials: sand or other absorbent material, cloth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use the product under well-ventilated conditions. Running water and eye wash equipment should be available. Wash hands before breaks, before using restroom facilities, and at the end of work.
Store safely, out of reach of children and away from food, animal feeding stuffs, medicines, etc. Keep in tightly closed original packaging. Store in a dry, cool, well-ventilated area. Do not expose to heat (e.g. sunlight). Store at temperatures below 45°C.
Wash hands before breaks, before using restroom facilities, and at the end of work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear the personal protective equipment specified below.
Plastic or rubber gloves recommended.
Wear safety goggles if there is a risk of eye splash. Eye protection must conform to EN 166.
Not required. In case of spraying/formation of spraying mists: Wear respiratory protective equipment. Filter type: A P. Respiratory protection must conform to one of the following standards: EN 136/140/145.
Ensure compliance with local regulations for emissions.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable when used in accordance with the supplier's directions.
Reacts with the following: Strong oxidisers.
None known.
Avoid heating and contact with ignition sources. Avoid temperatures >45°C.
Strong oxidisers.
None, if stored at the recommended storage conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Collect spills and waste in closed, leak-proof containers for disposal at the local hazardous waste site.
Collect spills and waste in closed, leak-proof containers for disposal at the local hazardous waste site.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Special Provisions: None.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LGEP 2?
The signal word is no signal word.
What is the physical form of LGEP 2?
LGEP 2 is a paste with light brown color. It has no data odor.
What is the solubility of LGEP 2?
Not miscible with the following: Water.
What is LGEP 2 used for?
Lubricant.
What are the hazard statements for LGEP 2?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of LGEP 2?
The melting point is No data and the boiling point is No data.