Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LGMT 2
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant /Lubricating grease
Manufacturers & Suppliers
SKF MAINTENANCE PRODUCTS
national supplier
Postbus 1008, NL-3430 BA Nieuwegein, The Netherlands
+31 30 6307200
http://www.skf.com
Emergency Contacts
NHS 111 (Scotland: NHS 24)
111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphthenic acids, zinc salts, basic EC: 282-762-6 | 84418-50-8 | 1.2% | Yes |
Please see section 16 for the full text of H-phrases.
Notes
Please see section 16 for the full text of H-phrases.
First Aid Measures
Emergency procedures for chemical exposure incidents
Seek fresh air. Seek medical advice in case of persistent discomfort.
Remove contaminated clothing. Wash skin with soap and water. Seek medical advice in case of persistent discomfort.
Symptoms: slight irritation, degreases the skin
Flush with water (preferably using eye wash equipment) until irritation subsides. Seek medical advice if symptoms persist.
Symptoms: slight irritation
Wash out mouth thoroughly and drink 1-2 glasses of water in small sips. Seek medical advice in case of discomfort.
Medical Treatment
Treat symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguish with powder, foam, carbon dioxide or water mist. Use water or water mist to cool non-ignited stock.
Do not use water stream, as it may spread the fire.
Not flammable, but combustible. Product decomposes in fire conditions or when heated to high temperatures, and inflammable and toxic gases may be released.
Move containers from danger area if it can be done without risk. Avoid inhalation of vapour and flue gases – seek fresh air.
Firefighter Protection
Wear Self-Contained Breathing Apparatus (SCBA) with chemical resistant gloves.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Contain and absorb spill with sand or other absorbent material and transfer to suitable waste containers. Wipe up minor spills with a cloth.
Wipe up minor spills with a cloth.
Prevent spillage from entering drains and/or surface water.
Transfer to suitable waste containers.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The product should be used under well-ventilated conditions and preferably under process ventilation. Running water and eye wash equipment should be available. Wash hands before breaks, before using restroom facilities, and at the end of work.
stored safely, out of reach of children and away from food, animal feeding stuffs, medicines, etc. Keep in tightly closed original packaging. Store in a dry, cool, well-ventilated area. Store at temperatures below 45 °C.
Wash hands before breaks, before using restroom facilities, and at the end of work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear the personal protective equipment specified below.
In the event of direct skin contact, wear protective gloves: Type of material and thickness: Nitrile rubber >0,38mm. Penetration time: >8 hours. Gloves must conform to EN 374.
Wear safety goggles if there is a risk of eye splash. Eye protection must conform to EN 166.
In case of risk of formation of spray mist, wear respiratory protective equipment with A/P2 filter. Respiratory protection must conform to one of the following standards: EN 136/140/145.
Ensure compliance with local regulations for emissions.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable when used in accordance with the supplier's directions.
Reacts with the following: Strong oxidisers.
None known.
Avoid heating and contact with ignition sources.
Strong oxidisers.
Product decomposes in fire conditions or when heated to high temperatures, and inflammable and toxic gases may be released.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Collect spills and waste in closed, leak-proof containers for disposal at the local hazardous waste site.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Special provisions: None.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LGMT 2?
The signal word is no signal word.
What is the physical form of LGMT 2?
LGMT 2 is a paste /fat. with reddish brown color. It has no data odor.
What is the solubility of LGMT 2?
Insoluble
What is LGMT 2 used for?
Lubricant /Lubricating grease
What is the melting point of LGMT 2?
The melting point is No data and the boiling point is No data.