Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LGHB 2
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant.
Uses advised against
None.
Manufacturers & Suppliers
Applied Industrial Technologies Ltd
67 Lady Ruby Drive East Tamaki 2013 Auckland NEW ZEALAND
0064 9 274 0056
www.appliednz.com
Emergency Contacts
New Zealand National Poisons Centre
0800 764 766
New Zealand Emergency Services
111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Benzenesulfonic acid, C10-16-alkyl derivs., calcium salts | 68584-23-6 | 10% | No |
| Benzenesulfonic acid, mono-C16-24-alkyl derivs., calcium salts | 70024-69-0 | 5% | No |
| Sulfonic acids, petroleum, calcium salts | 61789-86-4 | 5% | No |
| Benzenesulfonic acid, C10-13-alkyl derivs., calcium salts | 1335202-81-7 | 3% | No |
| Benzenamine, N-phenyl-, reaction products with 2,4,4-trimethylpentene | 68411-46-1 | 3% | No |
| C14-16-18 Alkyl Phenol | 1190625-94-5 | 0.3% | No |
Notes
The mineral oils in the product contain <3% DMSO extract(IP 346).
First Aid Measures
Emergency procedures for chemical exposure incidents
Seek fresh air, wash out mouth with water and blow nose thoroughly. Seek medical advice in case of persistent discomfort.
Remove contaminated clothing. Wash skin with soap and water. Seek medical advice in case of persistent discomfort.
Flush immediately with water (preferably using eye wash equipment) for at least 5 minutes. Open eye wide. Remove any contact lenses. Seek medical advice.
Symptoms: Irritating to eyes. Causes a burning sensation and tearing.
Wash out mouth thoroughly and drink 1-2 glasses of water in small sips. Seek medical advice in case of persistent discomfort.
Immediate Medical Attention
No special immediate treatment required.
Medical Treatment
Treat symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguish with powder, foam or water mist. Use water or water mist to cool non-ignited stock.
Do not use a jet of water, as it may spread the fire.
Not flammable, but combustible. The product decomposes when combusted and the following toxic gases can be formed: Carbon monoxide and carbon dioxide/ Nitrous gases/ Sulphur oxides.
Use water or water mist to cool non-ignited stock.
Firefighter Protection
Wear Self-Contained Breathing Apparatus (SCBA) with chemical resistant gloves.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stay upwind/keep distance from source.
Wipe up minor spills with a damp cloth.
Prevent spillage from entering drains and/or surface water.
Sweep up/collect spills for possible reuse or transfer to suitable waste containers. Wipe up minor spills with a damp cloth.
Materials: damp cloth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
A risk assessment must assure that employees are not exposed to effects from carcinogenic, mutagenic, or reproductive toxic substances. Special work clothes must be worn. A risk assessment must ensure that employees are not exposed to effects which might pose a risk by pregnancy or breastfeeding.
To be stored safely out of reach of children. Keep in tightly closed original packaging. Store in a dry area. Avoid direct sunlight.
Neither smoking, eating nor drinking is allowed in the work room. Work clothes, personal protective equipment and private clothes must be stored separately. Do not carry work clothes and personal protective equipment during lunch breaks. There must be an easy access to washing and toilet facilities. Wash hands before breaks, before using restroom facilities, and at the end of work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use the product under well-ventilated conditions, preferably outdoors. Wear the personal protective equipment specified below.
In the event of direct skin contact, wear protective gloves: Type of material and thickness: Nitrile rubber. 0,38 mm. Penetration time: >8 hours. The suitability and durability of a glove is dependant on usage, e.g. frequency and duration of contact, glove material thickness, functionality and chemical resistance. Always seek advice from the glove supplier.
Wear safety goggles.
Use process ventilation. If this is not possible, use respiratory equipment. Filter type: A. P.
Ensure compliance with local regulations for emissions.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable when used in accordance with the supplier's directions.
Reacts with the following: Strong oxidizers.
None known.
Avoid direct sunlight.
Strong oxidizers.
The product decomposes when combusted or heated to high temperatures and the following toxic gases can be formed: Carbon monoxide and carbon dioxide/ Nitrous gases/ Sulphur oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LGHB 2?
The signal word is warning.
What is the physical form of LGHB 2?
LGHB 2 is a solid substance with brown color. It has characteristic odor.
What is the solubility of LGHB 2?
Insoluble in the following: Water.
What is LGHB 2 used for?
Lubricant.
What are the hazard statements for LGHB 2?
This substance has 2 hazard statements:
- H319: Causes serious eye irritation.
- H361f: Suspected of damaging fertility.
What is the melting point of LGHB 2?
The melting point is > 300 °C and the boiling point is No data.