NextSDS Logo
Safety Data Sheet EN

LGFP 2

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LGFP 2

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricant.

Manufacturers & Suppliers

SKF MPT logo

SKF MPT

national supplier

Meidoornkade 14, 3992 AE, AE Houten

+31 30 6307200

www.skf.com

Emergency Contacts

NHS 111 (Scotland: NHS 24)

111

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Contains no substances subject to reporting requirements

Notes

The mineral oils in the product contain <3% DMSO extract(IP 346).

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Seek fresh air. Seek medical advice in case of persistent discomfort.

Skin contact

Remove contaminated clothing. Wash skin with soap and water. Seek medical advice in case of persistent discomfort.

Symptoms: slight irritation

Eye contact

Flush with water (preferably using eye wash equipment) until irritation subsides. Seek medical advice if symptoms persist.

Symptoms: slight irritation

Ingestion

Wash out mouth thoroughly and drink 1-2 glasses of water in small sips. Seek medical advice in case of persistent discomfort.

Immediate Medical Attention

Treat symptoms. No special immediate treatment required.

Medical Treatment

Treat symptoms.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Extinguish with powder, foam, carbon dioxide or water mist. Use water or water mist to cool non-ignited stock.

Unsuitable media

Do not use water stream, as it may spread the fire.

Specific hazards

Not flammable, but combustible. The product decomposes when combusted and the following toxic gases can be formed: Carbon monoxide and carbon dioxide/ Nitrous gases/ Sulphur oxides/ Phosphorous oxides/ Aldehydes/ Ketones.

Instructions

Move containers from danger area if it can be done without risk.

Firefighter Protection

Wear Self-Contained Breathing Apparatus (SCBA) with chemical resistant gloves.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Small spill

Wipe up minor spills with a cloth.

Environmental

Prevent spillage from entering drains and/or surface water.

Cleanup methods

Contain and absorb spill with sand or other absorbent material and transfer to suitable waste containers. Wipe up minor spills with a cloth.

Materials: sand, other absorbent material, cloth

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use the product under well-ventilated conditions. Running water and eye wash equipment should be available. Wash hands before breaks, before using restroom facilities, and at the end of work.

Storage

The product should be stored safely, out of reach of children and away from food, animal feeding stuffs, medicines, etc. Keep in tightly closed original packaging. Store frost-free. Do not expose to heat (e.g. sunlight). Store in a dry, cool, well-ventilated area.

Hygiene

Wash hands before breaks, before using restroom facilities, and at the end of work.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Wear the personal protective equipment specified below.

Hands

Plastic or rubber gloves recommended.

Eyes

Wear safety goggles if there is a risk of eye splash. Eye protection must conform to EN 166.

Respiratory

Not required.

Environmental

Ensure compliance with local regulations for emissions.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Paste
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Yellow
Colour Intensity
---
Form
---
Odor
Characteristic
Odor Threshold
No data
Ph
No data
Melting Point
> 250 °C
Boiling Point
> 250 °C
Flash Point
> 200 °C
Freezing Point
No data
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
No data
Vapor Density
No data
Relative Density
No data
Bulk Density
---
Density
~ 0,93 g/cm3
Flammability
No data
Upper Explosive Limit
No data
Lower Explosive Limit
No data
Explosive Limits
---
Auto Ignition Temperature
No data
Decomposition Temperature
No data
Solubility
Insoluble in the following: Water.
Partition Coefficient
No data
Solubility In Water
Insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
<3 %
Metal Corrosion
---
Dynamic Viscosity
No data
Kinematic Viscosity
No data
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable when used in accordance with the supplier's directions.

Reactivity

Reacts with the following: Acids/ Oxidisers.

Hazardous reactions

None known.

Avoid

Avoid heating and contact with ignition sources. Avoid direct sunlight. Avoid temperatures < 0°C.

Incompatible

Acids/ Oxidisers.

Decomposition

The product decomposes when combusted or heated to high temperatures and the following toxic gases can be formed: Carbon monoxide and carbon dioxide/ Nitrous gases/ Sulphur oxides/ Phosphorous oxides/ Aldehydes/ Ketones.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Avoid discharge to drain or surface water.

Disposal

If this product as supplied becomes a waste, it does not meet the criteria of a hazardous waste (Dir. 2008/98/EU). Disposal should be in accordance with applicable regional, national and local laws and regulations.

Waste Codes

12 01 12* spent waxes and fats EWC
15 02 03 Absorbents, filter materials, wiping cloths and protective clothing other than those mentioned in 15 02 02 EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not applicable.
Shipping Name
Not applicable.
Transport Class
Not applicable.
Packing Group
Not applicable.
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed

Special Provisions: None.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LGFP 2?

The signal word is no signal word.

What is the physical form of LGFP 2?

LGFP 2 is a paste with yellow color. It has characteristic odor.

What is the solubility of LGFP 2?

Insoluble in the following: Water.

What is LGFP 2 used for?

Lubricant.

What is the melting point of LGFP 2?

The melting point is > 250 °C and the boiling point is > 250 °C.