TECTYL 900

If symptoms are experienced remove source of contamination or move victim to fresh air and obtain medical advice.

Wash with soap and water. Remove contaminated clothing and launder. Get medical attention if irritation develops or persists.

Immediately flush eyes with plenty of water for at least 20 minutes retracting eyelids often. Tilt the head to prevent chemical from transferring to the uncontaminated eye. Get immediate medical attention and monitor the eye daily as advised by your physician.

Do not induce vomiting. Seek medical attention immediately. Provide medical care provider with this SDS.

Use methods suitable to fight surrounding fire. Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.

Use appropriate methods for the surrounding fire.

Prevent the spread of any spill to minimize harm to human health and the environment if safe to do so.

Prevent the spread of any spill to minimize harm to human health and the environment if safe to do so.

Gather and store in a sealed container pending a waste disposal evaluation.

Avoid contacting and avoid breathing the material. Use only in a well ventilated area. As with all chemicals, good industrial hygiene practices should be followed when handling this material. Wash thoroughly after handling. Do not get in eyes, on skin and clothing.

Store in a cool dry place. Isolate from incompatible materials.

good industrial hygiene practices should be followed when handling this material. Wash thoroughly after handling.

Local exhaust ventilation or other engineering controls are normally required when handling or using this product to avoid overexposure. Engineering controls must be designed to meet the OSHA chemical specific standard in 29 CFR 1910. Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits

Wear protective gloves. Inspect gloves for chemical break-through and replace at regular intervals. Chemically resistant gloves.

Wear chemically resistant safety glasses with side shields when handling this product. Do not wear contact lenses.

Respiratory protection may be required to avoid overexposure when handling this product. General or local exhaust ventilation is the preferred means of protection. Use a respirator if general room ventilation is not available or sufficient to eliminate symptoms. Follow a respiratory protection program that meets 29 CFR 1910.134 and ANSI Z88.2 requirements whenever work place conditions warrant the use of a respirator.

Wear protective gloves. Inspect gloves for chemical break-through and replace at regular intervals. Clean protective equipment regularly. When handling material that has been heated, wear chemically resistant thermally insulating gloves, chemical resistant apron, long sleeves and other clothing as necessary to protect against thermal burns.

Stable under normal conditions.

Hazardous polymerization will not occur. Under normal conditions of storage and use, hazardous reactions will not occur.

Contamination.

Strong acids, Strong oxidizing agents

Decomposition and hazardous decomposition products are unlikely.

Dispose of in accordance with Local and National regulations.