Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Supramor 4 Black Aerosol
- Product Form
- Aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Colouring agent
Uses advised against
None known.
Manufacturers & Suppliers
Chemetall Ltd
manufacturer
Denbigh Road, Bletchley Milton Keynes MK1 1PB
Emergency Contacts
Emergency Contact
01908 649333
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of organic solvents.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (Petroleum), hydrotreated light Kerosine-unspecified EC: 265-149-8 | 64742-47-8 | 65 - 80% | Yes |
| Propane EC: 200-827-9 | 74-98-6 | 2.5 - 10% | Yes |
| Butane EC: 203-448-7 | 106-97-8 | 10 - 25% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, call a physician.
Wash off with soap and plenty of water. If symptoms persist, call a physician.
Rinse immediately with plenty of water, also under the eyelids. Consult a physician.
Rinse mouth with water. Do NOT induce vomiting. Consult a physician.
Medical Treatment
Treat symptomatically. For specialist advice physicians should contact the Poisons Information Service.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), Dry powder, Alcohol-resistant foam, Water spray
High volume water jet
May form toxic gases on heating or in case of fire.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear personal protective equipment.
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.
soak up with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and transfer to a container for disposal according to local / national regulations (see section 13).
Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Have eye wash bottle or eye rinse ready at the work place.
Keep containers tightly closed in a dry, cool and well-ventilated place. Store in a place accessible by authorized persons only.
Have eye wash bottle or eye rinse ready at the work place.
Keep away from sources of ignition - No smoking. Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Electrical equipment should be protected to the appropriate standard. Use only explosion-proof equipment.
Nitrile rubber, Neoprene gloves, butyl-rubber. Protective gloves complying with EN 374. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time.
Eye protection (EN 166), Tightly fitting safety goggles
In case of insufficient ventilation wear suitable respiratory equipment. Recommended Filter type: AX-P2
Chemical resistant protective clothing according to DIN EN 13034 (Type 6)
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
Vapours may form explosive mixture with air.
Keep away from open flames, hot surfaces and sources of ignition. Protect from frost, heat and sunlight.
Strong acids and oxidizing agents
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations.
Dispose of in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS Butane, Propane
- Transport Class
- 2
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is classified and labelled in accordance with EC directives or respective national laws.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Supramor 4 Black Aerosol?
The signal word is danger.
What is the physical form of Supramor 4 Black Aerosol?
Supramor 4 Black Aerosol is a aerosol appearing as aerosol with black color. It has hydrocarbon-like odor.
What is Supramor 4 Black Aerosol used for?
Colouring agent
What are the hazard statements for Supramor 4 Black Aerosol?
This substance has 1 hazard statement:
- H222: Extremely flammable aerosol.