NextSDS Logo
Safety Data Sheet EN

UV-topcoat LM 4727 matt

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
UV-topcoat LM 4727 matt
Product Code
LM 4727

Regulatory Identifiers

CAS Number
N/A

Identified Uses

UV-Lacquer

Manufacturers & Suppliers

Lott-Lacke GmbH logo

Lott-Lacke GmbH

manufacturer

Bunsenstrasse 22, 32052 Herford

+49 (0) 5221 - 29794-0

http://www.lott-lacke.de

Emergency Contacts

Germany

0800-181-7059

USA/Canada

1-800-424-9300

Outside USA/Canada

+001 703 527 3887

China

4001 204937

ZH

Hong Kong

800 968 793

ZH

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1B H314
Eye Dam. Cat. 1 H318
Skin Sens. Cat. 1 H317
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P260 Do not breathe vapour.
P280 Wear protective gloves and eye/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor/ physician.
P405 Keep locked up.
P501 Dispose of contents/container to industrial incineration plant.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

acrylic resin

Chemical Name CAS Number Concentration Hazardous
2-propenoic acid, reaction products with dipentaerythritol EC: 800-838-4 1384855-91-7 10 - 12.5% Yes
oxybis(methyl-2,1-ethanediyl) diacrylate EC: 260-754-3 57472-68-1 5 - 10% Yes
2-(2-ethoxyethoxy)ethyl acrylate EC: 230-811-7 7328-17-8 5 - 10% Yes
1-methoxy-2-propanol EC: 203-539-1 107-98-2 5 - 10% Yes
hexamethylene diacrylate EC: 235-921-9 13048-33-4 5 - 10% Yes
2-hydroxy-2-methylpropiophenone EC: 231-272-0 7473-98-5 5 - 10% Yes
(1-methyl-1,2-ethanediyl)bis[oxy(methyl-2,1-ethanediyl)] diacrylate EC: 256-032-2 42978-66-5 5 - 10% Yes
reaction mass of: 2-(2-((oxo(phenyl)acetyl)oxy)ethoxy)ethyl oxo(phenyl)acetate, (2-(2-hydroxyethoxy)ethyl) oxo(phenyl)acetate EC: 442-300-8 --- 1 - 2.5% Yes
silicone acrylate EC: 603-070-6 125455-52-9 0.5% Yes

Full text of classification: see section 16

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove casualty to fresh air and keep warm and at rest. In case of irregular breathing or respiratory arrest provide artificial respiration. Call a physician immediately. If unconscious place in recovery position and seek medical advice.

Skin contact

Take off immediately all contaminated clothing. After contact with skin, wash immediately with plenty of water and soap. Do not use solvents or thinners. Conditions to avoid: UV-radiation/sunlight. Call a physician immediately. Wash contaminated clothing before reuse.

Symptoms: May irritate skin. May cause sensitization by skin contact.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical advice immediately. Show this safety data sheet to the doctor in attendance.

Symptoms: May irritate eyes.

Ingestion

Remove casualty to fresh air and keep warm and at rest. Seek medical advice immediately. Show this safety data sheet to the doctor in attendance. Keep victim calm. Do NOT induce vomiting. Rinse mouth immediately and drink plenty of water. Never give anything by mouth to an unconscious person or a person with cramps. If unconscious place in recovery position and seek medical advice. Do not leave affected person unattended.

Immediate Medical Attention

Call a physician immediately.

Medical Treatment

First Aid, decontamination, treatment of symptoms. Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Co-ordinate fire-fighting measures to the fire surroundings.

Unsuitable media

strong water jet

Specific hazards

Dense black smoke occurs during fire. Inhaling hazardous decomposing products can cause serious health damage. In case of fire may be liberated: Gases/vapours, harmful, carbon dioxide, carbon monoxide.

Instructions

Cool closed containers that are near the source of the fire.

Firefighter Protection

Wear a self-contained breathing apparatus and chemical protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Remove persons to safety.

Environmental

Do not allow to enter into surface water or drains.

Cleanup methods

Clean using cleansing agents. Do not use solvents.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only in well-ventilated areas. Keep away from heat sources, sparks and open flames. Avoid contact with skin, eyes and clothes. Do not inhale dusts, particulates and spray mist when using this preparation. Avoid respiration of swarf. When using do not eat, drink or smoke. Do not empty containers with pressure - no pressure vessel! Always keep in containers that correspond to the material of the original container. Follow the legal protection and safety regulations. Take precautionary measures against static discharges. Handle and open container with care.

Storage

Keep container tightly closed. Do not empty containers with pressure - no pressure vessel! Smoking is forbidden. Store carefully closed containers upright to prevent any leaks. Store in a well-ventilated and dry room at temperatures between 5 °C and 30 °C. Protect from heat and direct sunlight. Keep only in the original container. Can polymerise exothermically if heated, exposed to air, sunlight or by addition or free radical initiators.

Hygiene

Wash hands before breaks and after work. Take off immediately all contaminated clothing. Contaminated work clothing should not be allowed out of the workplace. Handle in accordance with good industrial hygiene and safety practice. Keep work clothes separately. Wash contaminated clothing prior to re-use. Keep away from food, drink and animal feedingstuffs. Guarantee that the eye flushing systems and safety showers are closely located to the working place.

Fire prevention

Keep away from heat sources, sparks and open flames. Remove all sources of ignition. Smoking is forbidden.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide good ventilation. This can be achieved with local or room suction.

Hands

For prolonged or repeated handling the following glove material must be used: NBR (Nitrile rubber) Thickness of the glove material > 0,4 mm ; Breakthrough time (maximum wearing time) > 480 min. Observe the instructions and details for use, storage, maintenance and replacement provided by the protective glove manufacturer. Penetration time of glove material depending on intensity and duration of exposure to skin. Recommended glove articles EN ISO 374. Barrier creams can help protecting exposed skin areas. In no case should they be used after contact.

Eyes

Wear eye glasses with side protection according to EN 166.

Respiratory

If the pollutant concentration is beyond the occupational exposure limit values, approved and suitable respiratory protection must be used. Observe the wear time limits according GefStoffV in combination with the rules for using respiratory protection apparatus (BGR 190). Use only respiratory protection equipment with CE-symbol including four digit test number. respirator with A/P-filter (EN 14387)

Skin/Body

Wear suitable protective clothing.

Environmental

Do not allow to enter into surface water or drains. Discharge into the environment must be avoided. If the product contaminates lakes, rivers or sewages, inform competent authorities in accordance with local regulations.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Crystallisation Point
---
Odor Threshold
not determined
Odor
characteristic
Vapor Density
not determined
Melting Point
not applicable
Colour
colourless
Evaporation Rate
not determined
Physical State
Liquid
Solidification Point
---
Solubility In Fat
---
Properties Status
---
Cloud Point
---
Appearance
---
Solubility
---
Physical State Data
liquid
Softening Point
---
Explosive Limits
---
Form
---
Colour Intensity
---
Auto Ignition Temperature
210 °C
State Under Standard Conditions
---
Solubility In Water
insoluble
Relative Evaporation Rate
---
Metal Corrosion
---
Bulk Density
---
Upper Explosive Limit
13,7 Vol-%
Decomposition Temperature
not determined
Boiling Point
120 °C
Lower Explosive Limit
1,5 Vol-%
Flash Point
> 60 °C
Ph
not determined
Density
not determined
Freezing Point
not applicable
Molecular Weight
---
Kinematic Viscosity
---
Relative Density
not determined
Voc Content
---
Partition Coefficient
see section 12
Flammability
Burning time (s): not applicable
Dynamic Viscosity
---
Vapor Pressure
not determined
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable under storage at normal ambient temperatures.

Reactivity

No dangerous reaction known under conditions of normal use.

Hazardous reactions

No hazardous reaction when handled and stored according to provisions.

Avoid

Heat, strong ultraviolet radiation. An exotherm polymerization of the product may thereby be caused. Avoid unintended contact with it. Hazardous decomposition byproducts may form with exposure to high temperatures. Protect from frost.

Incompatible

Radical former, Oxidizing agent, Peroxides, Reducing agent, Acids, Alkali (lye)

Decomposition

Hazardous decomposition byproducts may form with exposure to high temperatures, e.g.: carbon dioxide, carbon monoxide, smoke, Gases/vapours, harmful.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Do not allow to enter into surface water or drains. This material and its container must be disposed of in a safe way. Waste disposal according to directive 2008/98/EC, covering waste and dangerous waste.

Disposal

Do not allow to enter into surface water or drains. This material and its container must be disposed of in a safe way.

Waste Codes

080111* Waste paint and varnish containing organic solvents or other dangerous substances EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1760
Shipping Name
Corrosive liquid, n.o.s. (2(2-ETHOXYETHOXY)ETHYL ACRYLATE)
Transport Class
8
Packing Group
II
ADR

Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage.

IMDG

Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage.

IATA

Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for UV-topcoat LM 4727 matt?

The signal word is danger.

What is the physical form of UV-topcoat LM 4727 matt?

UV-topcoat LM 4727 matt is a liquid with colourless color. It has characteristic odor.

What is UV-topcoat LM 4727 matt used for?

UV-Lacquer

What are the hazard statements for UV-topcoat LM 4727 matt?

This substance has 3 hazard statements:

  • H314: Causes severe skin burns and eye damage.
  • H317: May cause an allergic skin reaction.
  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of UV-topcoat LM 4727 matt?

The melting point is not applicable and the boiling point is 120 °C.

Compliance Scanner

Scan your compliance