Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LUX Topcoat VP 2422 HV
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- HTDX-TCY1-KX71-3RT5
Identified Uses
uv varnish. For use in industrial installations and professional treatment only.
Manufacturers & Suppliers
DK Coatings GmbH
manufacturer
Bertha-Benz-Str. 20, D-26160 Bad Zwischenahn
+49 (0) 44 03 / 60268-0
www.dk-coatings.com
Emergency Contacts
Giftinformationszentrum-Nord (GIZ-Nord)
+49 (0)551 – 19240
0-24 Uhr
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| hexamethylene diacrylate EC: 235-921-9 | 13048-33-4 | 30 - 35% | Yes |
| Unsaturated acrylate resin | --- | 30 - 35% | Yes |
| Glycerol propoxylate triacrylate EC: 500-114-5 | 52408-84-1 | 10 - 15% | Yes |
| acrylated resin | --- | 1 - 5% | Yes |
| 2-Propenoic acid, ester with 1,3,5-tris(2-hydroxyethyl)-1,3,5-triazine-2,4,6(1H,3H,5H)-trione EC: 915-672-9 | 88403-03-6 | 1 - 5% | Yes |
| Methylbenzoylformate EC: 239-263-3 | 15206-55-0 | 1 - 5% | Yes |
| 2-Propenoic acid, dodecyl ester EC: 218-463-4 | 2156-97-0 | 1 - 5% | Yes |
| Reaction mass of bis (1,2,2,6,6-pentamethyl-4-piperidyl) sebacate and methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate EC: 915-687-0 | 1065336-91-5 | 1 - 5% | Yes |
| (OLD) Reaction products of 2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-hydroxyphenol with ((C10-16, rich in C12-13 alkyloxy)methyl)oxyrane EC: 410-560-1 | --- | 1 - 5% | Yes |
| 2-ethylhexyl acrylate EC: 203-080-7 | 103-11-7 | 1% | Yes |
| 1-methoxy-2-propanol; monopropylene glycol methyl ether EC: 203-539-1 | 107-98-2 | 1% | Yes |
| 2-methoxy-1-methylethyl acetate EC: 203-603-9 | 108-65-6 | 1% | Yes |
| Ethyl phenyl(2,4,6-trimethylbenzoyl)phosphinate EC: 282-810-6 | 84434-11-7 | 1% | Yes |
| acrylic acid; prop-2-enoic acid EC: 201-177-9 | 79-10-7 | 1% | Yes |
| cyclohexane EC: 203-806-2 | 110-82-7 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. When in doubt or if symptoms are observed, get medical advice.
After contact with skin, wash immediately with plenty of water and soap. Take off immediately all contaminated clothing and wash it before reuse. Medical treatment necessary.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.
Rinse mouth immediately and drink 1 glass of of water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person or a person with cramps. Get medical advice/attention.
Immediate Medical Attention
Medical treatment necessary.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Co-ordinate fire-fighting measures to the fire surroundings.
Full water jet
Non-flammable. In case of fire may be liberated: Carbon monoxide, Nitrogen oxides (NOx)
Use water spray jet to protect personnel and to cool endangered containers.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing. Full protection suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Provide adequate ventilation. Do not breathe gas/fumes/vapour/spray. Avoid contact with skin, eyes and clothes. Use personal protection equipment.
Do not allow to enter into surface water or drains. Avoid release to the environment.
Absorb with liquid-binding material (sand, diatomaceous earth, acid- or universal binding agents). Treat the recovered material as prescribed in the section on waste disposal.
Materials: sand, diatomaceous earth, acid- or universal binding agents
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
If handled uncovered, arrangements with local exhaust ventilation have to be used. Do not breathe gas/fumes/vapour/spray. Wash hands before breaks and after work. Avoid contact with skin, eyes and clothes.
Keep container tightly closed in a cool, well-ventilated place. Protect from sunlight. Keep away from heat.
Remove contaminated, saturated clothing immediately. Draw up and observe skin protection programme. Wash hands and face before breaks and after work and take a shower if necessary. When using do not eat, drink, smoke, sniff.
No special fire protection measures are necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If handled uncovered, arrangements with local exhaust ventilation have to be used. Do not breathe gas/fumes/vapour/spray. Technical ventilation of workplace
Wear suitable gloves, certified by EN ISO 374-1 at least Type B. Suitable gloves type NBR (Nitrile rubber). Thickness of the glove material > 0,56 mm. Breakthrough time: < 60 Min. When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. After consultation with producer, there may be used gloves with less thickness if the protection is sufficient enough.
Suitable eye protection: fully-eye-covering safety glasses, chemical safe..
In case of inadequate ventilation wear respiratory protection. Filtering device (full mask or mouthpiece) with filter: Type A-P2
Wear suitable protective clothing. (e.g. cotton coat, safety shoes).
Do not empty into drains. Discharge into the environment must be avoided.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The mixture is chemically stable under recommended conditions of storage, use and temperature.
Danger of polymerisation
To follow: 10.1 Reactivity
UV-radiation/sunlight, Frost, Heat.
No information available.
Gases/vapours, toxic Acrylic acid, Carbon dioxide (CO2), Carbon monoxide, Nitrogen oxides (NOx), Isocyanates.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Hexamethylendiacrylate, 2-Propenoic acid, dodecyl ester)
- Transport Class
- 9
- Packing Group
- III
274 335 969
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LUX Topcoat VP 2422 HV?
The signal word is danger.
What is the physical form of LUX Topcoat VP 2422 HV?
LUX Topcoat VP 2422 HV is a liquid with light yellow color. It has like: acrylate odor.
What is LUX Topcoat VP 2422 HV used for?
uv varnish. For use in industrial installations and professional treatment only.
What are the hazard statements for LUX Topcoat VP 2422 HV?
This substance has 5 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H400: Very toxic to aquatic life.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of LUX Topcoat VP 2422 HV?
The melting point is not determined and the boiling point is > 107 °C.