Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
UV-topcoat LM 4727 matt .
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS05
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H412: Harmful to aquatic life with long lasting effects.
Precautionary Statements
- P280: Wear protective gloves and eye/face protection.
- P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
- P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310: Immediately call a POISON CENTER or doctor/ physician.
- P362 + P364: Take off contaminated clothing and wash it before reuse.
- P501: Dispose of contents/container to industrial incineration plant.
Manufacturers & Suppliers
Authorized suppliers, manufacturers, and distribution network information
24/7 Emergency Response
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
acrylic resin
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hexanedioic acid, polymer with (chloromethyl)oxirane,2-ethyl-2-(hydroxymethyl)-1,3-propanediol, 4,4'-(1-methylethylidene)bis[phenol] and oxirane, 2-propenoate EC: 865-368-4 | 184181-05-3 | 10-20% | Hazardous |
| 2-propenoic acid, reaction products with dipentaerythritol EC: 800-838-4 | 1384855-91-7 | 10-20% | Hazardous |
| oxybis(methyl-2,1-ethanediyl) diacrylate EC: 260-754-3 | 57472-68-1 | 10-20% | Hazardous |
| 2-(2-ethoxyethoxy)ethyl acrylate EC: 230-811-7 | 7328-17-8 | 5-10% | Hazardous |
| 1-methoxy-2-propanol EC: 203-539-1 | 107-98-2 | 5-10% | Hazardous |
| hexamethylene diacrylate EC: 235-921-9 | 13048-33-4 | 5-10% | Hazardous |
| (1-methyl-1,2-ethanediyl)bis[oxy(methyl-2,1-ethanediyl)] diacrylate EC: 256-032-2 | 42978-66-5 | 5-10% | Hazardous |
| 2-hydroxy-2-methylpropiophenone EC: 231-272-0 | 7473-98-5 | 5-10% | Hazardous |
| reaction mass of: 2-(2-((oxo(phenyl)acetyl)oxy)ethoxy)ethyl oxo(phenyl)acetate, (2-(2-hydroxyethoxy)ethyl) oxo(phenyl)acetate EC: 442-300-8 | N/A | 1-2.5% | Hazardous |
| silicone acrylate EC: 603-070-6 | 125455-52-9 | 0.1-1% | Hazardous |
Additional Information
Full text of classification: see section 16
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
Inhalation Exposure
Remove casualty to fresh air and keep warm and at rest. In case of irregular breathing or respiratory arrest provide artificial respiration. Call a physician immediately. If unconscious but breathing normally, place in recovery position and seek medical advice.
Skin Contact
Take off immediately all contaminated clothing. After contact with skin, wash immediately with plenty of water and soap. Do not use solvents or thinners. Conditions to avoid: UV-radiation/sunlight Call a physician immediately. Wash contaminated clothing before reuse.
Symptoms:
May irritate skin. May cause sensitization by skin contact.
Eye Contact
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical advice immediately. Show this safety data sheet to the doctor in attendance.
Symptoms:
May irritate eyes.
Ingestion/Swallowing
Remove casualty to fresh air and keep warm and at rest. Seek medical advice immediately. Show this safety data sheet to the doctor in attendance. Keep victim calm. Do NOT induce vomiting. Rinse mouth immediately and drink plenty of water. Never give anything by mouth to an unconscious person or a person with cramps. If unconscious but breathing normally, place in recovery position and seek medical advice. Do not leave affected person unattended.
Immediate Medical Attention Required
Call a physician immediately. Seek medical advice immediately. In all cases of doubt, or when symptoms persist, seek medical advice. First Aid, decontamination, treatment of symptoms.
Medical Treatment
Treat symptomatically.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment
Occupational exposure limits, engineering controls, and required safety equipment
Engineering Controls
Provide good ventilation. This can be achieved with local or room suction. If this should not be sufficient to keep aerosol and solvent vapour concentration below the exposure limit values,a suitable respiratory protection must be used.
Hand Protection
For prolonged or repeated handling the following glove material must be used: NBR (Nitrile rubber) Thickness of the glove material > 0,4 mm ; Breakthrough time: > 480 min. Observe the instructions and details for use, storage, maintenance and replacement provided by the protective glove manufacturer. Penetration time of glove material depending on intensity and duration of exposure to skin. Recommended glove articles EN ISO 374 Barrier creams can help protecting exposed skin areas. In no case should they be used after contact.
Eye Protection
Wear eye glasses with side protection according to EN 166.
Respiratory Protection
If the pollutant concentration is beyond the occupational exposure limit values, approved and suitable respiratory protection must be used. Use only respiratory protection equipment with CE-symbol including four digit test number. respirator with A/P-filter (EN 14387)
Skin/Body Protection
Wear suitable protective clothing.
Environmental Exposure Controls
Do not allow to enter into surface water or drains. Discharge into the environment must be avoided. If the product contaminates lakes, rivers or sewages, inform competent authorities in accordance with local regulations. See section 7. No additional measures necessary.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
UN Number
not applicable
Transport Hazard Class
not applicable
Packing Group
not applicable
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for UV-topcoat LM 4727 matt?
The signal word for this substance is "danger".
What is the physical form of UV-topcoat LM 4727 matt?
UV-topcoat LM 4727 matt is a liquid with colourless color. It has characteristic odor.
What are the hazard statements for UV-topcoat LM 4727 matt?
This substance has 4 hazard statements: H315: Causes skin irritation. H317: May cause an allergic skin reaction. H318: Causes serious eye damage. H412: Harmful to aquatic life with long lasting effects.
What is the melting point of UV-topcoat LM 4727 matt?
The melting point is not applicable and the boiling point is 120 °C.