NextSDS Logo
Safety Data Sheet EN

CROMOFIX BEIGE 01B359

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
CROMOFIX BEIGE 01B359

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Coloration / Aditivation of plastic materials

Manufacturers & Suppliers

I

IQAP MASTERBATCH GROUP S.L.U.

manufacturer

Crta. de Vic a Olot, Km 5, 08510 LES MASIES DE RODA, Barcelona

I

IQAP MASTERBATCH GROUP S.L.U.

manufacturer

C/ Guadalajara, 6, Ap 299 03440 IBI, Alicante

+34 96 555 49 49

Emergency Contacts

Emergency Contact

+34 93 850 00 66

From 8:00 a.m. to 6:00 p.m. Monday to Friday

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Dispersion of pigments or colourants in a PVC

Notes

The mixture contained in the polymer presents no risk to human health by inhalation or contact with the skin in the form in which it is marketed.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Make sure the victim breathes pure air. Remove the victim from the place of exposure. Seek medical attention

Skin contact

Remove affected clothing and wash the entire area of skin exposed to the product with mild soap and water; then, rinse with hot water.

Eye contact

Thoroughly wash the victim’s eyes for 15 minutes with running water and with the eyelids open. If the eye irritation persists, consult a doctor.

Ingestion

Rinse the mouth out immediately and give plenty of water to drink. If the person is conscious, make them vomit. Seek emergency medical attention.

Immediate Medical Attention

Seek medical attention (inhalation), consult a doctor (eyes), Seek emergency medical attention (swallowing).

Medical Treatment

Symptomatic treatment

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam, Extinguishing powder, Carbon dioxide, Water mist.

Unsuitable media

Do not apply a direct stream of water

Specific hazards

The gases determining the hazard are: hydrogen chloride and toxic fumes.

Instructions

Use water mist to cool fire-exposed containers.

Firefighter Protection

Do not enter the fire area without special protection clothing and protected with self-contained respiratory equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ventilate the area. Equip staff with the appropriate means of protection. Evacuate the area and keep unprotected staff members away.

Environmental

Prevent the substance from entering drains and water pipes. Prevent it from being released into the environment.

Cleanup methods

remove by mechanical means

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wash thoroughly after handling. Follow the recommendations regarding general hygiene measures in the workplace, such as: a) Do not eat, drink or smoke in work areas b) Wash hands after every use, and c) remove contaminated clothing and protective equipment before entering the areas for eating.

Storage

Store only in the original container and in a cool and well-ventilated place. Keep the storage temperature below 35°C. Keep the container closed when not in use. Caution: Risk of slipping.

Hygiene

Do not eat, drink or smoke in work areas. Wash hands after every use, and remove contaminated clothing and protective equipment before entering the areas for eating.

Fire prevention

Avoid the accumulation of electrostatic charges. Eliminate the possible sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Wear gloves that are resistant to chemical products (EN 374):E.g.: nitrilic

Eyes

Chemical goggles or safety glasses (EN 166) e.g.: glasses with a frame and side protection

Respiratory

No special measures are required.

Skin/Body

Due to the product's colouring properties, a closed protective suit should be used to avoid staining during handling.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Solid in granules
Flash Point
---
Appearance
---
Softening Point
---
Vapor Pressure
---
Properties Status
---
Partition Coefficient
---
Voc Content
---
Flammability
---
Relative Density
---
Kinematic Viscosity
---
Solubility In Water
---
Bulk Density
---
Vapor Density
---
Solubility
---
Lower Explosive Limit
---
Auto Ignition Temperature
---
State Under Standard Conditions
---
Cloud Point
---
Colour Intensity
---
Metal Corrosion
---
Upper Explosive Limit
---
Solidification Point
---
Solubility In Fat
---
Odor
Odourless
Molecular Weight
not applicable
Form
---
Density
---
Melting Point
---
Odor Threshold
---
Freezing Point
---
Evaporation Rate
---
Explosive Limits
---
Crystallisation Point
---
Ph
---
Physical State Data
solid
Relative Evaporation Rate
---
Colour
BEIGE
Boiling Point
---
Dynamic Viscosity
---
Decomposition Temperature
above 200 °C
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

See Section 10.3 "Possibility of hazardous reactions".

Hazardous reactions

In the form supplied, the product is not likely to cause explosions

Avoid

Direct sunlight. Extremely high or extremely low temperatures

Incompatible

Strong acids. Strong alkalis. Strong oxidants.

Decomposition

Decomposes at temperatures above 200 °C. Carbon monoxide and nitrous gases

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Avoid releasing it into the environment. Elimination or disposal in accordance with local/national or EU legislation.

Disposal

Dispose of this material and its container at a collection point for hazardous or special waste, in accordance with local, regional, national or international regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Ensure that local and national regulations are complied with.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for CROMOFIX BEIGE 01B359?

The signal word is no signal word.

What is the physical form of CROMOFIX BEIGE 01B359?

CROMOFIX BEIGE 01B359 is a solid in granules with beige color. It has odourless odor.

What is CROMOFIX BEIGE 01B359 used for?

Coloration / Aditivation of plastic materials