Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Zinc Aluminium Alloy Wire
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Thermal Spraying
Manufacturers & Suppliers
ZINACOR S.A.
manufacturer
Centre d'Affaires Dony, rue de Chênée, 53, B-4031 ANGLEUR (BELGIQUE)
+32 (0)4 366 64 74/75
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
When inhaled, move the person to fresh air and seek medical advice.
Wash thoroughly with plenty of water. In case of contact with molten product, cool skin area rapidly with cold water.
In case of contact with eyes, rinse immediately thoroughly with plenty of water and consult an ophthalmologist.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry extinguishing powder, Carbon dioxide (CO2), Dry sand
Water
In case of fire may form: Metal oxides
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid built up of dust, Ensure adequate ventilation, Avoid inhalation
Do not allow to enter drains/surface water/ground-water. Avoid release into the environment.
Take up mechanically, placing in appropriate containers for disposal.
Materials: appropriate containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
All work processes must always be designed so that the following is excluded: Inhalation, Skin contact, Eye contact.
Store product closed an only in original packing. Protect against moisture and store closed. Avoid condensation.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation. This can be achieved by local exhaust ventilation.
Hand protection must be adapted to work
eye protection must be adapted to work
In the presence of ZnO smoke and dust respirator may be required (particulate filter unit with DIN EN 143). If this is insufficient to keep the concentration below the exposure limits (OEL), suitable respiratory protection should be worn.
body protection must be adapted to work
No information available at present.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable when properly handled and stored
No hazardous reactions under normal conditions.
See sub section 10.4 to 10.6
Moisture, Strong heating
See also Section 7, Avoid contact with strong acids, Avoid contact with strong alkalis, Development of: hydrogen gas - explosion
See sub section 10.4 to 10.6, See also section 5.2, Metal Oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste disposal according to EC-regulations 75/442/EEC and 91/689/EEC in the corresponding versions, covering waste and dangerous waste
Implement Substance recycling.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Classification and identification see Section 2
The product does not contain a vPvB substance (vPvB = very persistent, very bioaccumulative) and does not fall under the Annex XIII of Regulation (EC) 1907/2006. The product does not contain any PBT (PBT = persistent, bioaccumulative, toxic) and does not fall under the Annex XIII of Regulation (EC) 1907/2006.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Zinc Aluminium Alloy Wire?
The signal word is no signal word.
What is the physical form of Zinc Aluminium Alloy Wire?
Zinc Aluminium Alloy Wire is a solid with shiny metallic color. It has odorless odor.
What is Zinc Aluminium Alloy Wire used for?
Thermal Spraying
What is the melting point of Zinc Aluminium Alloy Wire?
The melting point is ~ 382 - 488 °C and the boiling point is n.av..