Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- NEUTRAX PF
- Product Code
- 010320 V4.
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Acidic rinse aid for autoscrubbers.
Manufacturers & Suppliers
FRANKLAB.
undefined
3 avenue des Frênes.78180.MONTIGNY LE BRETONNEUX.FRANCE.
+33 1 39 44 93 40
www.sterifrance.com
Emergency Contacts
INRS Paris
+33 1 40 44 30 00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ACETIC ACID EC: 200-580-7 | 64-19-7 | 10 - 25% | Yes |
| ACIDE CITRIQUE, MONOHYDRATE | 5949-29-1 | 2.5% | Yes |
Notes
(Full text of H-phrases: see section 16)
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove any soiled or splashed clothing immediately. Watch out for any remaining product between skin and clothing, watches, shoes, etc.
Wash thoroughly with fresh, clean water for 15 minutes holding the eyelids open.
Do not give the patient anything orally. Seek medical attention immediately, showing the label.
Immediate Medical Attention
Regardless of the initial state, refer the patient to an ophthalmologist and show him the label. If the contaminated aera is widespread and/or there is damage to the skin, a doctor must be consulted or the patient transferred to hospital. Seek medical attention immediately, showing the label.
Medical Treatment
No data available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to health. Do not breathe in smoke.
No data available.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Consult the safety measures listed under headings 7 and 8. Avoid any contact with the skin and eyes.
Prevent any material from entering drains or waterways.
Neutralise with an alkaline decontaminant, such as an aqueous solution of sodium carbonate or similar. If the ground is contaminated, once the product has been recovered by sponging with an inert and non-combustible absorbent material, wash the contaminated area in plenty of water. Clean preferably with a detergent, do not use solvents.
Materials: alkaline decontaminant, such as an aqueous solution of sodium carbonate or similar; inert and non-combustible absorbent material; detergent
Related Substances
Similar chemicals with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Requirements relating to storage premises apply to all facilities where the mixture is handled. Always wash hands after handling. Remove and wash contaminated clothing before re-using. Emergency showers and eye wash stations will be required in facilities where the mixture is handled constantly. Prevent access by unauthorised personnel. For personal protection, see section 8. Observe precautions stated on label and also industrial safety regulations. No smoking, eating or drinking in areas where the mixture is used.
No data available.
Always wash hands after handling. Remove and wash contaminated clothing before re-using. No smoking, eating or drinking in areas where the mixture is used. Observe precautions stated on label and also industrial safety regulations.
Prevent access by unauthorised personnel.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that there is adequate ventilation, especially in confined areas.
Wear suitable protective gloves in the event of prolonged or repeated skin contact. Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN ISO 374-1. Gloves must be selected according to the application and duration of use at the workstation. Protective gloves need to be selected according to their suitability for the workstation in question : other chemical products that may be handled, necessary physical protections (cutting, pricking, heat protection), level of dexterity required. Type of gloves recommended : - PVC (polyvinyl chloride) - Butyl Rubber (Isobutylene-isoprene copolymer)
Avoid contact with eyes. Use eye protectors designed to protect against liquid splashes Before handling, wear safety goggles with protective sides accordance with standard EN166. In the event of high danger, protect the face with a face shield. Prescription glasses are not considered as protection. Individuals wearing contact lenses should wear prescription glasses during work where they may be exposed to irritant vapours. Provide eyewash stations in facilities where the product is handled constantly.
Avoid skin contact. Wear suitable protective clothing. Suitable type of protective clothing : In the event of substantial spatter, wear liquid-tight protective clothing against chemical risks (type 3) in accordance with EN14605/A1 to prevent skin contact. In the event of a risk of splashing, wear protective clothing against chemical risks (type 6) in accordance with EN13034/A1 to prevent skin contact. Wear suitable protective clothing, in particular overalls and boots. These items must be kept in good condition and cleaned after use. Work clothing worn by personnel shall be laundered regularly. After contact with the product, all parts of the body that have been soiled must be washed.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This mixture is stable under the recommended handling and storage conditions in section 7.
No data available.
No data available.
No data available.
No data available.
The thermal decomposition may release/form : - carbon monoxide (CO) - carbon dioxide (CO2)
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2790
- Shipping Name
- ACETIC ACID SOLUTION, more than 10% and less than 50% acid, by mass
- Transport Class
- 8
- Packing Group
- III
For limited quantities, see part 2.7 of the OACI/IATA and chapter 3.4 of the ADR and IMDG. For excepted quantities, see part 2.6 of the OACI/IATA and chapter 3.5 of the ADR and IMDG.
For limited quantities, see part 2.7 of the OACI/IATA and chapter 3.4 of the ADR and IMDG. For excepted quantities, see part 2.6 of the OACI/IATA and chapter 3.5 of the ADR and IMDG.
For limited quantities, see part 2.7 of the OACI/IATA and chapter 3.4 of the ADR and IMDG. For excepted quantities, see part 2.6 of the OACI/IATA and chapter 3.5 of the ADR and IMDG.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for NEUTRAX PF?
The signal word is danger.
What is the physical form of NEUTRAX PF?
NEUTRAX PF is a fluid liquid. with unspecified color.
What is NEUTRAX PF used for?
Acidic rinse aid for autoscrubbers.
What are the hazard statements for NEUTRAX PF?
This substance has 1 hazard statement:
- H314: Causes severe skin burns and eye damage.