Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Pergrip™ Run KF
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Deicing agent
Uses advised against
Not identified.
Manufacturers & Suppliers
Perstorp Specialty Chemicals AB
SE-284 80 Perstorp, Sweden
+46 435 380 00
http://www.perstorp.com
Emergency Contacts
Emergency Contact
(+1) 760 476 3961 (contract no: 334101)
Emergency Contact
(+44 8 08 189 0979 (contract no: 334101)
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This product does not contain candidate substances of very high concern at a concentration >=0.1% (Regulation (EC) No. 1907/2006 (REACH), Article 59)
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Potassium formate EC: 209-677-9 | 590-29-4 | 50% | Yes |
Notes
Classification according to Regulation (EC) No. 1272/2008 [CLP] - Notes Full text of H- and EUH-phrases: see section 16
First Aid Measures
Emergency procedures for chemical exposure incidents
First aid measures not required, but get fresh air for personal comfort.
Immediate medical attention is not required. Wash with plenty of water and soap.
Wash with plenty of water. If symptoms persist, call a doctor.
Clean mouth with water and drink plenty of water afterwards. If a large quantity has been ingested or you feel unwell, get medical advice/attention.
Immediate Medical Attention
If symptoms persist, call a doctor. If a large quantity has been ingested or you feel unwell, get medical advice/attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Not combustible. Use extinguishing agent suitable for type of surrounding fire.
Not applicable.
None in particular.
Firefighter Protection
No special protective equipment required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop leak if you can do it without risk.
Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal
Pump up the product into a spare container suitably labelled.
Do not allow into any sewer, on the ground or into any body of water.
Dilute with plenty of water. Clean contaminated surface thoroughly.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use personal protective equipment as required. Avoid contact with skin and eyes.
Keep tightly closed in a dry and cool place. Keep away from heat. Protect from sunlight. Do not store at temperatures below -50 °C.
Handle in accordance with good industrial hygiene and safety practice. Take off all contaminated clothing and wash it before re-use.
Keep away from heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas.
Wear protective gloves. Butyl rubber. Chloroprene rubber, CR. Nitrile rubber, NBR. Ensure that the breakthrough time of the glove material is not exceeded. Refer to glove supplier for information on breakthrough time for specific gloves.
Wear safety glasses with side shields (or goggles).
None under normal use conditions.
No special technical protective measures are necessary.
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
There exists no specific test data for this product. For further information, see the subsequent subsections of this chapter.
None under normal processing.
None under normal use conditions.
Strong acids. Strong bases. Oxidising substances.
Thermal decomposition can lead to release of irritating and toxic gases and vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The product is not classified as hazardous waste.
The product is not classified as hazardous waste.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not regulated
- Shipping Name
- Not regulated
- Transport Class
- Not regulated
- Packing Group
- Not regulated
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Not applicable for International and European Union regulations.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Pergrip™ Run KF?
The signal word is no signal word.
What is the physical form of Pergrip™ Run KF?
Pergrip™ Run KF is a liquid with clear, light yellow color. It has weak characteristic odor.
What is the solubility of Pergrip™ Run KF?
No information available
What is Pergrip™ Run KF used for?
Deicing agent
What is the melting point of Pergrip™ Run KF?
The melting point is <= -60 °C and the boiling point is > 100 °C.