Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Aldepol RA 105
- Product Code
- SDB-V9610
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
to produce coating material
Manufacturers & Suppliers
Imparat Farbwerk Iversen & Måhl GmbH & Co. KG
manufacturer
Siemensstr. 8, D-21509 Glinde / Hamburg
+49(0)40-727708-700
Emergency Contacts
Emergency Contact
+49(0)551-19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
acrylate copolymer
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1,2-benzisothiazol-3(2H)-one EC: 220-120-9 | 2634-33-5 | 0.01 - 0.05% | Yes |
| reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) | 55965-84-9 | 0.0015% | Yes |
Full text of classification: see section 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. In case of irregular breathing or respiratory arrest provide artificial respiration.
Take off immediately all contaminated clothing. After contact with skin, wash immediately with plenty of water and soap. Do not use solvents or thinners.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical advice/attention.
If swallowed, rinse mouth with water (only if the person is conscious). Immediately call a doctor. Keep victim calm. Do NOT induce vomiting.
Immediate Medical Attention
Get medical advice/attention. Immediately call a doctor.
Medical Treatment
First Aid, decontamination, treatment of symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Not applicable.
Not applicable.
No information available.
Firefighter Protection
No information available.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter into surface water or drains.
Clean using cleansing agents. Do not use solvents.
Related Products
Similar products with comparable safety profiles
RENOFORM ALUROL
---
ALCUPOL F5612
CAS: 25791-96-2
ARALDITE® MY 0510
CAS: 5026-74-4
Alusol SL 61 XBB
UFI: 2UC2-F0CE-P00P-QX5R
RHODACAL 70
UFI: CFX9-R41K-Q4AG-X0EV
ALCUPOL® P-2321, ALCUPOL® P-2621, ALCUPOL® P-2921, ALCUPOL® P-3021, ALCUPOL® P-3041, ALCUPOL® P-3041N, ALCUPOL® P-3091, ALCUPOL® P-3091S, ALCUPOL® P-3421, ALCUPOL® P-3621, ALCUPOL® P-3621S
---
ARALDITE® PY 306 CH
CAS: 9003-36-5
ARALDITE® PY 306 CH
CAS: 9003-36-5
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin, eyes and clothes. Avoid respiration of swarf. Personal protection equipment: refer to
When using do not eat, drink or smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide good ventilation. This can be achieved with local or room suction.
For prolonged or repeated handling the following glove material must be used: NR (natural rubber, Natural latex). Thickness of the glove material 0,4 mm Breakthrough time: 30 min. Observe the instructions and details for use, storage, maintenance and replacement provided by the protective glove manufacturer. Penetration time of glove material depending on intensity and duration of exposure to skin: Recommended glove articles EN ISO 374
Wear closely fitting protective glasses in case of splashes.
Not applicable.
Wear suitable protective clothing and gloves.
Do not allow to enter into surface water or drains. See section 7. No additional measures necessary.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable when applying the recommended regulations for storage and handling. Further information on correct storage: refer to section 7.
No information available.
Keep away from strong acids, strong bases and strong oxidizing agents to avoid exothermic reactions.
Stable when applying the recommended regulations for storage and handling. Further information on correct storage: refer to section 7. Hazardous decomposition byproducts may form with exposure to high temperatures.
not applicable
Hazardous decomposition byproducts may form with exposure to high temperatures, e.g.: carbon dioxide, carbon monoxide, smoke, nitrogen oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste disposal according to directive 2008/98/EC, covering waste and dangerous waste.
This material and its container must be disposed of in a safe way.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- not applicable
- Transport Class
- not applicable
- Packing Group
- not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Aldepol RA 105?
The signal word is no signal word.
What is the physical form of Aldepol RA 105?
Aldepol RA 105 is a liquid with white color. It has slight odor odor.
What is Aldepol RA 105 used for?
to produce coating material
What is the melting point of Aldepol RA 105?
The melting point is not applicable and the boiling point is 100 °C.