Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Alpacon Descalant III
- Product Code
- 905234102
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- PPK3-T0NY-C00D-NGSV
Identified Uses
Professional use only. Cleaning material/ Detergent
Manufacturers & Suppliers
Alfa Laval Technologies AB
SE-221 00 Lund, Sweden
+46 46 36 65 00
www.alfalaval.com
Emergency Contacts
Emergency Contact
999
Emergency Contact
111
24h
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture: consisting of the following components.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| citric acid EC: 201-069-1 | 77-92-9 | 30 - 50% | Yes |
| Fermented whey EC: 295-893-9 | 92129-93-6 | 5 - 10% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor if symptoms persist.
Symptoms: respiratory irritation
Wash with water and soap.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If symptoms persist consult a doctor.
Symptoms: Causes serious eye irritation.
Rinse the mouth with water. Do NOT induce vomiting. Contact a doctor/physician.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishing methods suitable to surrounding conditions.
Not applicable.
Formation of toxic gases is possible during heating or in case of fire.
Firefighter Protection
Wear self-contained respiratory protective device. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with eyes. Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation. Do not breathe vapour.
Dilute with plenty of water.
Absorb with liquid-binding material
Related Products
Similar products with comparable safety profiles
Alpacon Descalant Offshore
---
Alpacon multi CIP II
---
Alusol SL 61 XBB
UFI: 2UC2-F0CE-P00P-QX5R
Calcon 900 SC, Calcon 1000 SC, Calcon 1100 SC
---
Calcon 900 SC, Calcon 1000 SC, Calcon 1100 SC
---
Decalcifier II
---
Decalcifier II
---
ALCUPOL® P-2321, ALCUPOL® P-2621, ALCUPOL® P-2921, ALCUPOL® P-3021, ALCUPOL® P-3041, ALCUPOL® P-3041N, ALCUPOL® P-3091, ALCUPOL® P-3091S, ALCUPOL® P-3421, ALCUPOL® P-3621, ALCUPOL® P-3621S
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes.
No special requirements.
When using do not eat, drink or smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only in well-ventilated areas.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Nitrile rubber, NBR, Natural rubber, NR. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Wear eye/face protection. Tightly sealed goggles
In case of insufficient ventilation, wear suitable respiratory equipment.
Wear protective clothing.
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The material is stable under recommended storage and handling conditions.
The material is stable under recommended storage and handling conditions.
No dangerous reactions known.
Do not store together with alkalis (caustic solutions).
Reacts with alkali (lyes).
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Small amounts may be diluted with plenty of water and washed away. Dispose of bigger amounts in accordance with Local Authority requirements.
Must not be disposed together with household garbage.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Alpacon Descalant III?
The signal word is warning.
What is the physical form of Alpacon Descalant III?
Alpacon Descalant III is a liquid appearing as liquid with light yellow color. It has acidic odor.
What is the solubility of Alpacon Descalant III?
Easily soluble.
What is Alpacon Descalant III used for?
Professional use only. Cleaning material/ Detergent
What are the hazard statements for Alpacon Descalant III?
This substance has 2 hazard statements:
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
What is the melting point of Alpacon Descalant III?
The melting point is 0 °C (ca) and the boiling point is 100 °C (ca).