Alpacon Descalant Offshore

Supply fresh air; consult doctor if symptoms persist.

After contact with skin, take off immediately all contaminated clothing, and wash immediately with plenty of water. If symptoms persist consult a doctor.

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor. Rinse cautiously with water for 20 minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Rinse out mouth and then drink plenty of water. If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label.

Use fire extinguishing methods suitable to surrounding conditions.

Not applicable.

No further relevant information available.

Avoid skin and eye contact Do not breathe vapour.

Small spillages (<20L) can be washed out with water into drain. (10:1)

Larger spills (>20L): Send for recovery or disposal in suitable receptacles. Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).

Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system. Do not allow to enter sewers/ surface or ground water.

Small spillages (<20L) can be washed out with water into drain. (10:1). Larger spills (>20L): Absorb with liquid-binding material.

Materials: water (for small spills), liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust) (for large spills)

Store in a dry place. Keep container tightly sealed.

When using do not eat, drink or smoke.

No special measures required.

Eye wash bottle or emergency eye wash fountain must be found in the work place.

The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Neoprene gloves, PVC gloves, Butyl rubber, BR, Nitrile rubber, NBR. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Tightly sealed goggles

Use suitable respiratory protective device only when aerosol or mist is formed. Filter P2

Must not reach sewage water or drainage ditch undiluted or unneutralised.

Stable under normal temperature conditions and under recommended usage and storage.

The material is stable under recommended storage and handling conditions.

No dangerous reactions known.

No decomposition if used according to specifications. Do not store together with alkalis (caustic solutions).

Do not store together with alkalis (caustic solutions).

No dangerous decomposition products known.