Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BOLL CLEAN 2000+
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- QC00-60HM-R002-GWXC
Identified Uses
Cleaning agent / Cleaner
Manufacturers & Suppliers
Boll & Kirch Filterbau GmbH
manufacturer
Siemensstr. 10-14 D-50170 Kerpen
+49 (0) 2273 562-0
www.bollfilter.com/de
Emergency Contacts
Poison Information Center Mainz
+49 (0) 6131 19240
24h
DE, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of the substances listed below with harmless additions (aqueous solution).
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-Propylheptanolethoxylate (6-10 EO) | 160875-66-1 | 5 - 10% | Yes |
| Quartenary C12-C14 alkylaminethoxylate, chloride | 1554325-20-0 | 2.5 - 5% | Yes |
| A mixture of: 2-ethylhexyl mono-D-glucopyranoside; 2-ethylhexyl di-D-glucopyranoside EC: 414-420-0 | 161074-93-7 | 1 - 2.5% | Yes |
| 2-Propylheptanolethoxylate (5 EO) | 160875-66-1 | 1 - 2.5% | Yes |
| sodium hydroxide EC: 215-185-5 | 1310-73-2 | 1% | Yes |
Regulation (EC) No 648/2004 on detergents / Labelling for contents: non-ionic surfactants ≥5 - <15%, cationic surfactants, perfumes <5%. For the wording of the listed hazard phrases refer to section 16.
Notes
This product does not contain any substances of very high concern (REACH Regulation (EC) No 1907/2006, Article 57).
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
Instantly wash with water and soap and rinse thoroughly. If skin irritation persists, seek medical advice.
Rinse immediately opened eye for several minutes under running water. Then consult doctor.
Rinse out mouth and then drink plenty of water. Do not induce vomiting; instantly call for medical help.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire fighting measures that suit the environment. Carbon dioxide, extinguishing powder, water jet or alcohol-resistant foam.
Thermal decomposition may release irritant gases and vapours
Endangered containers in the surrounding area should be cooled with a water-hose.
Firefighter Protection
See section 8. Wear full protective suit with self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment and keep unprotected persons away.
If large amounts are released, the authorities must be informed. Dilute with much water.
Do not allow to enter drainage system, surface or ground water. Dilute with much water.
Absorb with liquid-binding material
Materials: liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Avoid repeated or long-term skin contact.
Keep containers tightly closed. Store in cool, dry conditions. Keep container tightly sealed.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Nitrile rubber, NBR, recommended thickness of the material: ≥ 0.4 mm, penetration time: ≥ 480 min. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed safety glasses.
Not necessary if room is well-ventilated.
Standard protective clothing. Chemical resistant safety-shoes or boots. If skin contact is possible, wear impenetrable protective clothing against this solvent.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known
No further relevant information available.
Strong acids strong oxidizing agents
Thermal decomposition can produce a variety of compounds, the precise nature of which will depend on the decomposition conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BOLL CLEAN 2000+?
The signal word is danger.
What is the physical form of BOLL CLEAN 2000+?
BOLL CLEAN 2000+ is a fluid appearing as fluid with light brown color. It has characteristic odor.
What is the solubility of BOLL CLEAN 2000+?
Water: Fully miscible
What is BOLL CLEAN 2000+ used for?
Cleaning agent / Cleaner
What are the hazard statements for BOLL CLEAN 2000+?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
What is the melting point of BOLL CLEAN 2000+?
The melting point is Not determined and the boiling point is Not determined.