Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Hematoxylin Stain Solution (Gill Formulation #3)
- Product Code
- CS402-1D; CS402-4D
- Synonyms
- Gill Hematoxylin
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals.
Uses advised against
Not for food, drug, pesticide or biocidal product use
Manufacturers & Suppliers
Fisher Scientific
manufacturer
One Reagent Lane, Fair Lawn, NJ 07410
(201) 796-7100
Emergency Contacts
CHEMTREC®
800-424-9300
CHEMTREC®
001-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Water | 7732-18-5 | 56.5% | No |
| Ethylene glycol | 107-21-1 | 25.5% | No |
| Aluminium sulfate octadecahydrate | 7784-31-8 | 10% | No |
| Acetic acid | 64-19-7 | 6% | No |
| Sodium iodate | 7681-55-2 | 1% | No |
| Benz[b]indeno[1,2-d]pyran-3,4,6a,9,10(6H)-pentol, 7,11b-dihydro-, cis-(+)- | 517-28-2 | 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. Obtain medical attention.
Wash off immediately with plenty of water for at least 15 minutes. Obtain medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Immediate medical attention is required.
Do not induce vomiting. Call a physician or Poison Control Center immediately.
Immediate Medical Attention
Immediate medical attention is required for eye contact. Obtain medical attention for skin, inhalation, and ingestion.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Keep product and empty container away from heat and sources of ignition.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
See Section 12 for additional ecological information.
Sweep up and shovel into suitable containers for disposal.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation. Wear personal protective equipment. Avoid contact with skin and eyes.
Keep containers tightly closed in a dry, cool and well-ventilated place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Ensure that eyewash stations and safety showers are close to the workstation location.
Wear appropriate protective gloves
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Wear appropriate protective gloves and clothing to prevent skin exposure.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known, based on information available
None under normal processing. Hazardous polymerization does not occur.
Incompatible products.
Strong oxidizing agents
None under normal use conditions
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Hematoxylin Stain Solution (Gill Formulation #3) known by?
Hematoxylin Stain Solution (Gill Formulation #3) is also known as: Gill Hematoxylin
What is the hazard signal word for Hematoxylin Stain Solution (Gill Formulation #3)?
The signal word is warning.
What is the physical form of Hematoxylin Stain Solution (Gill Formulation #3)?
Hematoxylin Stain Solution (Gill Formulation #3) is a liquid appearing as no information available . It has odorless odor.
What is the solubility of Hematoxylin Stain Solution (Gill Formulation #3)?
No information available
What is Hematoxylin Stain Solution (Gill Formulation #3) used for?
Laboratory chemicals.
What are the hazard statements for Hematoxylin Stain Solution (Gill Formulation #3)?
This substance has 5 hazard statements:
- H302: Harmful if swallowed
- H315: Causes skin irritation
- H320: Causes eye irritation
- H336: May cause drowsiness or dizziness
- H373: May cause damage to organs through prolonged or repeated exposure
What is the melting point of Hematoxylin Stain Solution (Gill Formulation #3)?
The melting point is No data available and the boiling point is No information available.