Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Haematoxylin Gill No.3
- Product Code
- RBA-4207-00F, 01.583.112
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Professional use
Manufacturers & Suppliers
CellPath Ltd.
manufacturer
80 Mochdre Enterprise Park, Newtown SY16 4LE, United Kingdom
+44 (0) 1686 611 333
Emergency Contacts
Emergency Contact
+44 (0) 7803 746 135
24h/7d
NPIS
0845 46 47
NPIS
08454 24 24 24
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethylene Glycol | --- | 25 - 50% | Yes |
| Aluminium Sulphate EC: 233-135-0 | 10043-01-3 | 5 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. Provide fresh air.
Wash with plenty of soap and water.
Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.
Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting.
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical advice. If breathing is irregular or stopped, immediately seek medical assistance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, BC-powder, Carbon dioxide (CO2)
Water jet
Substance or mixture corrosive to metals.
Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
In case of fire and/or explosion do not breathe fumes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Wipe up with absorbent material (e.g. cloth, fleece). Collect spillage: sawdust, kieselgur (diatomite), sand, universal binder
Materials: sawdust, kieselgur (diatomite), sand, universal binder
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use local and general ventilation. Use only in well-ventilated areas. Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Store in corrosive resistant container with a resistant inner liner.
Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General ventilation.
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Wear eye/face protection.
In case of inadequate ventilation wear respiratory protection.
Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
See below 'Conditions to avoid'.
Substance or mixture corrosive to metals.
No known hazardous reactions.
There are no specific conditions known which have to be avoided.
Oxidisers
Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
The substance is not classified as hazardous to the aquatic environment.
12.2 Persistence and degradability
Data are not available.
12.3 Bioaccumulative potential
Data are not available.
12.4 Mobility in soil
Data are not available.
12.5 Results of PBT and vPvB assessment
Data are not available.
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste shall be separated into the categories that can be handled separately by the local or national waste management facilities.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Provisions for dangerous goods (ADR) should be complied within the premises.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Relevant provisions of the European Union (EU)
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Haematoxylin Gill No.3?
The signal word is danger.
What is the physical form of Haematoxylin Gill No.3?
Haematoxylin Gill No.3 is a liquid with not determined color. It has characteristic odor.
What is the solubility of Haematoxylin Gill No.3?
not determined
What is Haematoxylin Gill No.3 used for?
Professional use
What are the hazard statements for Haematoxylin Gill No.3?
This substance has 5 hazard statements:
- H290: May be corrosive to metals.
- H302: Harmful if swallowed.
- H318: Causes serious eye damage.
- H336: May cause drowsiness or dizziness.
- H373: May cause damage to organs through prolonged or repeated exposure.
What is the melting point of Haematoxylin Gill No.3?
The melting point is not determined and the boiling point is not determined.