NextSDS Logo
Safety Data Sheet EN

Hubron Black Masterbatch PVB 22

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Hubron Black Masterbatch PVB 22
Synonyms
Masterbatch based on Polyolefin containing carbon black pigment

Regulatory Identifiers

CAS Number
N/A

Identified Uses

As a masterbatch component of polymeric products.

Manufacturers & Suppliers

H

Hubron (International) Ltd

manufacturer

Albion Street, Failsworth, Manchester, M35 0FP, United Kingdom

+44 (0)161 681 2691

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Hazard Statements

Not applicable

Precautionary Statements

Not applicable

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Carbon Black 1333-86-4 --- No
Ethylene Vinyl Acetate 24937-78-8 --- No
Vinyl Acetate (residual) 108-05-4 0.18% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Unlikely at ambient temperatures.

Skin contact

Unlikely to cause any problems. Get medical attention if irritation develops.

Eye contact

Flush thoroughly with water. If irritation occurs, get medical assistance.

Ingestion

No adverse effects due to ingestion are expected. If irritation or other symptoms develop, seek medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray, foam, dry chemical or CO₂.

Specific hazards

Product is supplied as pellets. However, if product is ground, dust may form an explosive atmosphere when dispersed in air.

Instructions

In the event of a fire, wear a NIOSH approved, positive pressure, self-contained breathing apparatus (SCBA) and full protective clothing. Evacuate all non-essential personnel from the danger area.

Firefighter Protection

In the event of a fire, wear a NIOSH approved, positive pressure, self-contained breathing apparatus (SCBA) and full protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Keep spilled material away from heat, sparks and open flames. Ensure adequate ventilation.

Cleanup methods

Collect spilled material using a method that minimizes dust generation (e.g. wet methods, HEPA vacuum). Place waste in an appropriate container for disposal. Use care during clean-up to avoid exposure to the material and injury from broken containers.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Store under cool dry conditions and observe normal standards of industrial hygiene when handling. Pallets should not be double stacked, unless the appropriate risk assessment has been undertaken and actions are in place for pedestrian clearance and spillage clear up in case the stack becomes unstable.

Storage

Store under cool dry conditions. Storage Temperature: [Ambient]. Storage Pressure: [Ambient]. Do not store in open or unlabelled containers.

Hygiene

observe normal standards of industrial hygiene

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use local exhaust ventilation during dust producing operations.

Hands

If product is hot, thermally protective, chemical resistant gloves are recommended. If contact with forearms is likely, wear gauntlet style gloves.

Eyes

Not normally required but advisable in workplace environments.

Respiratory

Not normally required this product is in pellet form and not in powder format or dust. However, if required the following respirators are recommended: US: NIOSH approval under 42 CFR 84 required. OSHA (29 CFR 1910.134). ANSI Z88.2-1992 (Respiratory Protection).

Skin/Body

Not normally required but advisable in workplace environments.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

State Under Standard Conditions
---
Softening Point
---
Solubility
---
Upper Explosive Limit
No data available
Colour Intensity
---
Vapor Density
Not known.
Bulk Density
---
Relative Density
1.15 - 1.25
Lower Explosive Limit
No data available
Molecular Weight
---
Metal Corrosion
Not known.
Kinematic Viscosity
---
Solubility In Water
Insoluble.
Vapor Pressure
Not Applicable.
Properties Status
---
Crystallisation Point
---
Odor Threshold
Not applicable
Solidification Point
---
Cloud Point
---
Decomposition Temperature
Material will rapidly decompose above 300°C.
Partition Coefficient
Not known.
Dynamic Viscosity
---
Density
---
Voc Content
---
Flash Point
Not known.
Evaporation Rate
Not known
Relative Evaporation Rate
---
Freezing Point
No data available
Boiling Point
Not known.
Ph
Not known.
Physical State Data
solid
Auto Ignition Temperature
Not known.
Appearance
---
Physical State
Solid
Solubility In Fat
---
Flammability
Not known.
Form
Pellets (3mm x 3mm)
Melting Point
100°C - 120°C
Odor
None to Mild
Colour
Black
Explosive Limits
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Material is chemically stable under normal conditions.

Reactivity

Stable under normal conditions.

Hazardous reactions

Not reactive under normal conditions.

Avoid

Avoid elevated temperatures for prolonged periods of time.

Incompatible

Not known.

Decomposition

Combustion of this material will generate toxic fumes, including carbon dioxide, carbon monoxide (in situations where oxygen starvation occurs) monomers, low molecular weight polymers and their oxidation products. Self-contained breathing apparatus must be used during firefighting.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not regulated
Shipping Name
Not Regulated
Packing Group
Not regulated
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Hubron Black Masterbatch PVB 22 known by?

Hubron Black Masterbatch PVB 22 is also known as: Masterbatch based on Polyolefin containing carbon black pigment

What is the hazard signal word for Hubron Black Masterbatch PVB 22?

The signal word is no signal word.

What is the physical form of Hubron Black Masterbatch PVB 22?

Hubron Black Masterbatch PVB 22 is a solid with black color. It has none to mild odor.

What is Hubron Black Masterbatch PVB 22 used for?

As a masterbatch component of polymeric products.

What are the hazard statements for Hubron Black Masterbatch PVB 22?

This substance has 1 hazard statement:

  • Not applicable

What is the melting point of Hubron Black Masterbatch PVB 22?

The melting point is 100°C - 120°C and the boiling point is Not known..