Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Prime-a-pump
- Chemical Name
- Mixture
- Synonyms
- Mixture
Regulatory Identifiers
- CAS Number
- Not applicable Check regulations →
- EC Number
- Not applicable Check regulations →
Identified Uses
Concrete pump primer
Manufacturers & Suppliers
Prime-a-Pump Ltd
manufacturer
Unit 10 Howe Lane, White Waltham, Maidenhead, SL6 3JP, United Kingdom
+44(0) 118 934 3999
Emergency Contacts
Emergency Contact
+44 (0)330 024 4662
24hrs
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium Carbonate | 00497-19-8 | 30 - 60% | Yes |
| Polymer | --- | 30 - 60% | No |
| Solid Lubricant | --- | 5 - 30% | No |
Substances contained in this product that are not classified as hazardous have been/will be registered for REACH at the appropriate time.
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
Wash off with soap and plenty of water. Consult a physician.
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray or powder.
Carbon oxides and sodium oxides. Hazardous combustion products.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Avoid breathing dust.
Do not let product enter drains.
Pick up and arrange disposal without creating dust. Damp down sweep up and shovel.
Materials: Keep in suitable, closed containers for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Further processing of solid materials may result in the formation of combustible dusts. The potential for combustible dust formation should be taken into consideration before additional processing occurs.
Keep container tightly closed in a dry and well-ventilated place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Handle in accordance with good industrial hygiene and safety practice.
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Wash and dry hands. Material: Nitrile rubber, Minimum layer thickness: 0.11 mm, Break through time: 480 min
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Use EU P3 mask or respirator cartridges.
Wear dust proof coveralls meeting type 5. Normal work wear.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is hygroscopic
No Data available
None identified
Exposure to moisture
Strong acids
No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Prime-a-pump known by?
Prime-a-pump is also known as: Mixture
What is the hazard signal word for Prime-a-pump?
The signal word is warning.
What is the physical form of Prime-a-pump?
Prime-a-pump is a powder appearing as white to grey powder with white to grey color.
What is the solubility of Prime-a-pump?
Partially soluble
What is Prime-a-pump used for?
Concrete pump primer
What are the hazard statements for Prime-a-pump?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of Prime-a-pump?
The melting point is Not available and the boiling point is Not available.