Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Waterproof Grease
- Product Code
- 99540
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Manufacturers & Suppliers
Bel-Ray Company, Inc.
manufacturer
P.O. Box 526, Farmingdale, NJ 07727, United States of America
+1 732 938 2421
Superior Lubricants
distributor
10/22 Oramzi Rd, GIRRAWEEN 2145
133 607 950
Emergency Contacts
CHEMTREC
800-424-9300
CHEMTREC
+1 703-527-3887
CHEMTREC
1800 069 100
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), Hydrotreated Heavy Naphthenic | 64742-52-5 | 90% | No |
| Distillates (petroleum), Solvent-refined Heavy Paraffinic | 64741-88-4 | 90% | No |
| Barium, Acetate Tallow Fatty Acids Complexes | 68201-19-4 | 10% | No |
| Diphenylamine | 122-39-4 | 10% | No |
| Sodium Dodecylbenzenesulfonate | 25155-30-0 | 10% | No |
| Xylene (all Isomers) | 1330-20-7 | 10% | No |
| Other components below reportable levels | --- | 30 - 60% | No |
Notes
IP 346: < 3.0% DMSO extract for all base oil substances.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Call a physician if symptoms develop or persist.
Rinse skin with water/shower. Get medical attention if irritation develops and persists.
Rinse with water. Get medical attention if irritation develops and persists.
Rinse mouth. Do not induce vomiting. If ingestion of a large amount does occur, call a poison control centre immediately. Never give liquid to an unconscious person.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water fog. Foam. Dry powder. Carbon dioxide (CO2).
Do not use water jet as an extinguisher, as this will spread the fire. Water.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
In case of spills, beware of slippery floors and surfaces.
Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination.
Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Cover with plastic sheet to prevent spreading. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water.
Prevent further leakage or spillage if safe to do so.
This product is miscible in water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use care in handling/storage.
Room temperature - normal conditions. Keep out of the reach of children.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General ventilation normally adequate.
Not normally needed.
Not normally needed.
No personal respiratory protective equipment normally required.
Normal work clothing (long sleeved shirts and long pants) is recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is stable under normal conditions.
Avoid temperatures exceeding the flashpoint.
Strong oxidizing agents.
Toxic gas. Nitrogen oxides (NOx). At thermal decomposition temperatures, carbon monoxide and carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Waterproof Grease?
The signal word is no signal word.
What is the physical form of Waterproof Grease?
Waterproof Grease is a liquid. appearing as grease with green. color. It has mild. odor.
What is Waterproof Grease used for?
Lubricant
What is the melting point of Waterproof Grease?
The melting point is Not available. and the boiling point is 360 °C (680 °F) estimated.