NextSDS Logo
Safety Data Sheet EN

Waterproof Patch and Seal Paste – White

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Waterproof Patch and Seal Paste – White

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Adhesives.

Uses advised against

Not known.

Manufacturers & Suppliers

T

The Gorilla Glue Company

manufacturer

2101 East Kemper Road, Cincinnati, Ohio, 45241

513-271-3300

T

The Gorilla Glue Company

distributor

2101 East Kemper Road, Cincinnati, Ohio, 45241

513-271-3300

Emergency Contacts

Prosar

1-800-420-7186

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Sens. Cat. 1B
Eye Irrit. Cat. 2A

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P261 Avoid breathing fume.
P280 Wear protective gloves/eye protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P501 Dispose of contents in accordance with local, state or national legislation.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Titanium dioxide 13463-67-7 5% No
N-(3-(trimethoxysilyl)propyl)ethylenediamine 1760-24-3 1 - 3% Yes
Diamid Wax Mixture --- 1 - 3% Yes
Trimethoxyvinylsilane 2768-02-7 1 - 2% Yes
Light Stabilizer --- 0.5% Yes
Methanol 67-56-1 0.2% Yes
Quartz (SiO2) 14808-60-7 0.2% No
Carbendazim 10605-21-7 0.1% Yes
Diocyltin oxide 870-08-6 0.1% Yes
(2-methoxymethylethoxy)propanol 34590-94-8 0.1% Yes
3-iodo-2-propynyl butylcarbamate 55406-53-6 0.05% Yes
n-hexane 110-54-3 0.001% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.

Skin contact

Wash with plenty of water. If skin irritation or rash occurs: Get medical advice/attention.

Symptoms: May cause an allergic skin reaction.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Symptoms: Causes serious eye irritation.

Ingestion

Wash out mouth with water. If symptoms develop, obtain medical attention.

Medical Treatment

Unlikely to be required but if necessary treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

As appropriate for surrounding fire.

Unsuitable media

None.

Specific hazards

Heating may cause decomposition.

Firefighter Protection

Fire fighters should wear complete protective clothing including self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Provide adequate ventilation. Avoid breathing fume. Wear appropriate personal protective equipment, avoid direct contact. Contaminated work clothing should not be allowed out of the workplace.

Environmental

Avoid release to the environment.

Cleanup methods

Transfer to a container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing fume. Wear protective gloves/eye protection. Wash hands and exposed skin thoroughly after handling. Take off contaminated clothing and wash it before reuse.

Storage

Ambient.

Hygiene

Wash hands and exposed skin thoroughly after handling. Take off contaminated clothing and wash it before reuse.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation.

Hands

Wear protective gloves. Breakthrough time of the glove material: refer to the information provided by the gloves' producer.

Eyes

Wear suitable eye/face protection.

Respiratory

Normally no personal respiratory protection is necessary.

Environmental

Avoid release to the environment.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Viscous paste.
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Viscous paste.
Colour
White.
Colour Intensity
---
Form
---
Odor
Slight.
Odor Threshold
Not known.
Ph
Not known.
Melting Point
Not known.
Boiling Point
Not known.
Flash Point
Not applicable.
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not known.
Vapor Pressure
Not known.
Vapor Density
Not applicable.
Relative Density
1.62
Bulk Density
---
Density
13.48 lbs/gal
Flammability
Non-flammable.
Upper Explosive Limit
Not applicable.
Lower Explosive Limit
Not applicable.
Explosive Limits
---
Auto Ignition Temperature
Not applicable.
Decomposition Temperature
Not known.
Solubility
---
Partition Coefficient
Not known.
Solubility In Water
Insoluble.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
15M cP
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

None anticipated.

Hazardous reactions

No hazardous reactions known if used for its intended purpose.

Avoid

Heat and direct sunlight.

Incompatible

Not known.

Decomposition

No hazardous decomposition products known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Waterproof Patch and Seal Paste – White?

The signal word is warning.

What is the physical form of Waterproof Patch and Seal Paste – White?

Waterproof Patch and Seal Paste – White is a viscous paste. appearing as viscous paste. with white. color. It has slight. odor.

What is Waterproof Patch and Seal Paste – White used for?

Adhesives.

What are the hazard statements for Waterproof Patch and Seal Paste – White?

This substance has 2 hazard statements:

  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.

What is the melting point of Waterproof Patch and Seal Paste – White?

The melting point is Not known. and the boiling point is Not known..