NextSDS Logo
Safety Data Sheet EN

Waterproof Patch & Seal Liquid (White)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Waterproof Patch & Seal Liquid (White)
Product Form
Mixture

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Liquid rubber product.

Manufacturers & Suppliers

The Gorilla Glue Company logo

The Gorilla Glue Company

manufacturer

2101 E. Kemper Road, Cincinnati, OH 45241

513-271-3300

http://www.gorillatough.com

Emergency Contacts

Prosar

1-800-420-7186

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Irrit. Cat. 2A H319
Skin Sens. Cat. 1 H317
Repr. Cat. 1B H360
Repr. Cat. 2 H361
STOT RE Cat. 2 H373
Aquatic Acute Cat. 3 H402
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H360 May damage fertility or the unborn child.
H361 Suspected of damaging fertility or the unborn child.
H373 May cause damage to organs through prolonged or repeated exposure.
H402 Harmful to aquatic life.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P260 Do not breathe mist, spray, vapors.
P264 Wash hands, forearms, and other exposed areas thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P273 Avoid release to the environment.
P280 Wear protective gloves, protective clothing, and eye protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 If exposed or concerned: Get medical advice/attention.
P314 Get medical advice/attention if you feel unwell.
P321 Specific treatment (see section 4 on this SDS).
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local, regional, national, territorial, provincial, and international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Limestone 1317-65-3 7 - 13% No
Titanium dioxide 13463-67-7 1 - 5% No
N-[3-(Trimethoxysilyl)propyl]-1,2-ethanediamine 1760-24-3 1 - 5% Yes
Silane, ethenyltrimethoxy- 2768-02-7 1 - 5% Yes
Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate 41556-26-7 0.5 - 1.5% Yes
Silica, amorphous, fumed, crystalline-free 112945-52-5 0.5 - 1.5% No
Tin, dibutylbis(2,4-pentanedionato-O,O')-, (OC-6-11)- 22673-19-4 0.1 - 1% Yes
Decanedioic acid, methyl 1,2,2,6,6-pentamethyl-4-piperidinyl ester 82919-37-7 0.1 - 1% Yes
Methanol 67-56-1 0.1% Yes
Quartz 14808-60-7 0.1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

When symptoms occur: go into open air and ventilate suspected area. Obtain medical attention if breathing difficulty persists.

Symptoms: Prolonged exposure may cause irritation.

Skin contact

Immediately drench affected area with water for at least 15 minutes. Remove contaminated clothing. Obtain medical attention if irritation/rash develops or persists. If exposed or concerned: Get medical advice/attention.

Symptoms: May cause an allergic skin reaction.

Eye contact

Immediately rinse with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention.

Symptoms: Contact causes severe irritation with redness and swelling of the conjunctiva.

Ingestion

Rinse mouth. Do NOT induce vomiting. Obtain medical attention.

Symptoms: Ingestion may cause adverse effects.

Immediate Medical Attention

Obtain medical attention if breathing difficulty persists, if irritation/rash develops or persists, or if exposed or concerned.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray, fog, carbon dioxide (CO₂), alcohol-resistant foam, or dry chemical.

Unsuitable media

Do not use a heavy water stream. Use of heavy stream of water may spread fire.

Specific hazards

Not considered flammable but may burn at high temperatures. Reacts with water and moisture in air liberating methanol.

Instructions

Use water spray or fog for cooling exposed containers.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate unnecessary personnel. Upon arrival at the scene, a first responder is expected to recognize the presence of dangerous goods, protect oneself and the public, secure the area, and call for the assistance of trained personnel as soon as conditions permit.

Environmental

Prevent entry to sewers and public waters. Avoid release to the environment.

Cleanup methods

Clean up spills immediately and dispose of waste safely. Transfer spilled material to a suitable container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Avoid contact with skin, eyes and clothing. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe mist, spray, vapors.

Storage

Keep container closed when not in use. Store in a dry, cool place. Keep/Store away from direct sunlight, extremely high or low temperatures and incompatible materials. Store locked up/in a secure area.

Hygiene

Handle in accordance with good industrial hygiene and safety procedures.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Ensure adequate ventilation, especially in confined areas. Ensure all national/local regulations are observed.

Hands

Wear protective gloves.

Eyes

Chemical safety goggles.

Respiratory

If exposure limits are exceeded or irritation is experienced, approved respiratory protection should be worn. In case of inadequate ventilation, oxygen deficient atmosphere, or where exposure levels are not known wear approved respiratory protection.

Skin/Body

Wear suitable protective clothing. Materials for Protective Clothing: Chemically resistant materials and fabrics.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Voc Content
---
Relative Density
Not available
Dynamic Viscosity
Not available
Vapor Density
---
Solubility
Not available
Physical State
Liquid
Upper Explosive Limit
Not available
Metal Corrosion
---
Solidification Point
---
Softening Point
---
Vapor Pressure
Not available
Form
---
Ph
Not available
Evaporation Rate
Not available
Auto Ignition Temperature
Not available
Solubility In Fat
---
Crystallisation Point
---
Odor Threshold
Not available
Melting Point
Not available
Decomposition Temperature
Not available
Solubility In Water
---
Partition Coefficient
Not available
Flammability
Not applicable
Bulk Density
---
Flash Point
Not available
Relative Evaporation Rate
---
Properties Status
---
Odor
Not available
Cloud Point
---
Colour Intensity
---
Freezing Point
Not available
Physical State Data
liquid
State Under Standard Conditions
---
Lower Explosive Limit
Not available
Kinematic Viscosity
Not available
Appearance
White
Colour
---
Explosive Limits
---
Boiling Point
Not available
Density
---
Molecular Weight
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended handling and storage conditions (see section 7).

Reactivity

Reacts with water and moisture in air liberating methanol.

Hazardous reactions

Hazardous polymerization will not occur.

Avoid

Direct sunlight, extremely high or low temperatures, and incompatible materials.

Incompatible

Oxidizers. Amines. Water. Halogens.

Decomposition

Not expected to decompose under ambient conditions.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Waterproof Patch & Seal Liquid (White)?

The signal word is danger.

What is the physical form of Waterproof Patch & Seal Liquid (White)?

Waterproof Patch & Seal Liquid (White) is a liquid appearing as white . It has not available odor.

What is the solubility of Waterproof Patch & Seal Liquid (White)?

Not available

What is Waterproof Patch & Seal Liquid (White) used for?

Liquid rubber product.

What are the hazard statements for Waterproof Patch & Seal Liquid (White)?

This substance has 7 hazard statements:

  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H360: May damage fertility or the unborn child.
  • H361: Suspected of damaging fertility or the unborn child.
  • H373: May cause damage to organs through prolonged or repeated exposure.
  • H402: Harmful to aquatic life.
  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of Waterproof Patch & Seal Liquid (White)?

The melting point is Not available and the boiling point is Not available.