Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Waterproof Patch & Seal Liquid (Black)
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Liquid rubber product.
Manufacturers & Suppliers
The Gorilla Glue Company
manufacturer
2101 E. Kemper Road, Cincinnati, OH 45241
513-271-3300
http://www.gorillatough.com
Emergency Contacts
Prosar
1-800-420-7186
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 7 - 13% | No |
| N-[3-(Trimethoxysilyl)propyl]-1,2-ethanediamine | 1760-24-3 | 1 - 5% | Yes |
| Silane, ethenyltrimethoxy- | 2768-02-7 | 1 - 5% | Yes |
| Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate | 41556-26-7 | 0.5 - 1.5% | Yes |
| Carbon black | 1333-86-4 | 0.5 - 1.5% | Yes |
| Silica, amorphous, fumed, crystalline-free | 112945-52-5 | 0.1 - 1% | No |
| Tin, dibutylbis(2,4-pentanedionato-O,O')-, (OC-6-11)- | 22673-19-4 | 0.1 - 1% | Yes |
| Decanedioic acid, methyl 1,2,2,6,6-pentamethyl-4-piperidinyl ester | 82919-37-7 | 0.1 - 1% | Yes |
| Methanol | 67-56-1 | 0.1% | Yes |
| Quartz | 14808-60-7 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
When symptoms occur: go into open air and ventilate suspected area. Obtain medical attention if breathing difficulty persists.
Symptoms: Prolonged exposure may cause irritation.
Immediately drench affected area with water for at least 15 minutes. Remove contaminated clothing. Obtain medical attention if irritation/rash develops or persists. If exposed or concerned: Get medical advice/attention.
Symptoms: May cause an allergic skin reaction.
Immediately rinse with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention.
Symptoms: Contact causes severe irritation with redness and swelling of the conjunctiva.
Rinse mouth. Do NOT induce vomiting. Obtain medical attention.
Symptoms: Ingestion may cause adverse effects.
Immediate Medical Attention
If exposed or concerned, get medical advice and attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, fog, carbon dioxide (CO₂), alcohol-resistant foam, or dry chemical.
Do not use a heavy water stream. Use of heavy stream of water may spread fire.
Not considered flammable but may burn at high temperatures. Reacts with water and moisture in air liberating methanol.
Use water spray or fog for cooling exposed containers.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Upon arrival at the scene, a first responder is expected to recognize the presence of dangerous goods, protect oneself and the public, secure the area, and call for the assistance of trained personnel as soon as conditions permit.
Prevent entry to sewers and public waters. Avoid release to the environment.
Clean up spills immediately and dispose of waste safely. Transfer spilled material to a suitable container for disposal.
Related Products
Similar products with comparable safety profiles
Waterproof Patch & Seal Liquid (Clear)
---
Waterproof Patch & Seal Liquid (White)
---
Waterproof Patch and Seal Paste – Black
---
Waterproof Patch & Seal Spray (Clear)
---
Waterproof Patch & Seal Spray -- White
---
Waterproof Patch and Seal Paste – White
---
Gorilla Waterproof Patch and Seal Spray - Black
---
Gorilla Waterproof Patch & Seal Tape
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Avoid contact with skin, eyes and clothing. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe mist, spray, vapors.
Keep container closed when not in use. Store in a dry, cool place. Keep/Store away from direct sunlight, extremely high or low temperatures and incompatible materials. Store locked up/in a secure area.
Handle in accordance with good industrial hygiene and safety procedures.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Ensure adequate ventilation, especially in confined areas. Ensure all national/local regulations are observed.
Wear protective gloves.
Chemical safety goggles.
Insufficient ventilation: wear respiratory protection. If exposure limits are exceeded or irritation is experienced, approved respiratory protection should be worn. In case of inadequate ventilation, oxygen deficient atmosphere, or where exposure levels are not known wear approved respiratory protection.
Protective clothing. Materials for Protective Clothing: Chemically resistant materials and fabrics. Wear suitable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended handling and storage conditions (see section 7).
Reacts with water and moisture in air liberating methanol.
Hazardous polymerization will not occur.
Direct sunlight, extremely high or low temperatures, and incompatible materials.
Oxidizers. Amines. Water. Halogens.
Not expected to decompose under ambient conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Waterproof Patch & Seal Liquid (Black)?
The signal word is danger.
What is the physical form of Waterproof Patch & Seal Liquid (Black)?
Waterproof Patch & Seal Liquid (Black) is a liquid appearing as black . It has not available odor.
What is the solubility of Waterproof Patch & Seal Liquid (Black)?
Not available
What is Waterproof Patch & Seal Liquid (Black) used for?
Liquid rubber product.
What are the hazard statements for Waterproof Patch & Seal Liquid (Black)?
This substance has 7 hazard statements:
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H360: May damage fertility or the unborn child.
- H361: Suspected of damaging fertility or the unborn child
- H373: May cause damage to organs through prolonged or repeated exposure.
- H402: Harmful to aquatic life.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Waterproof Patch & Seal Liquid (Black)?
The melting point is Not available and the boiling point is Not available.