Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MC-Injekt 2300 top - Komponente B
- Product Code
- 2869
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Polyurethane resin, Injektion
Manufacturers & Suppliers
MC-Bauchemie Müller GmbH & Co. KG
manufacturer
Am Kruppwald 1-8, D-46238 Bottrop
+49(0)2041-101-0
MC-Bauchemie AG
manufacturer
Hagackerstr. 10, CH-8953 Dietikon
+44-7400510
Emergency Contacts
MCR
+49 / (0)700 24112112
Emergency Contact
+48612864565
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Active substance with propellant. Mixture consisting of the following components.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| diphenylmethanediisocyanate, isomeres and homologues | 9016-87-9 | 50 - 70% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. Call a doctor immediately.
Instantly wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. Seek medical treatment.
Call a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder or water jet. Fight larger fires with water jet or alcohol-resistant foam.
Can be released in case of fire: Carbon monoxide (CO), Nitrogen oxides (NOx). Under certain fire conditions, traces of other toxic gases cannot be excluded, e.g.: Hydrogen cyanide (HCN)
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent material from reaching sewage system, holes and cellars.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
MC-Injekt 1264 compact - Komponente B
---
MC-Injekt 1264 compact - Komponente A
---
MC-Injekt GL-95 - Komponente A 3
---
MC-Injekt GL-95 TX - Komponente B 1
---
MC-Injekt GL-95 TX TR - Komponente B
---
MC-Injekt GL-95 TR - Komponente A 2
---
MC-Injekt GL-95 - Komponente A 1
---
Akepox 5010 Component B
UFI: N1AA-2R3V-FY04-TGPT
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
Store only in the original container. Keep container tightly sealed.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. After use of gloves apply skin-cleaning agents and skin cosmetics. Material of gloves: Butyl rubber, BR, Nitrile rubber, NBR. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: Nitril ≥ 0,40 mm ≥ 480min. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses. Tightly sealed safety glasses.
Short term filter device: In case of brief exposure or low pollution use breathing filter apparatus. In case of intensive or longer exposure use breathing apparatus that is independent of circulating air.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
Reacts with amines
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MC-Injekt 2300 top - Komponente B?
The signal word is danger.
What is the physical form of MC-Injekt 2300 top - Komponente B?
MC-Injekt 2300 top - Komponente B is a fluid appearing as fluid, dark brown with dark brown color. It has earthy, musty odor.
What is MC-Injekt 2300 top - Komponente B used for?
Polyurethane resin, Injektion
What are the hazard statements for MC-Injekt 2300 top - Komponente B?
This substance has 7 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- H335: May cause respiratory irritation.
- H351: Suspected of causing cancer.
- H373: May cause damage to organs through prolonged or repeated exposure.
What is the melting point of MC-Injekt 2300 top - Komponente B?
The melting point is Not determined and the boiling point is 351 °C.