Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MC-Injekt GL-95 TX TR - Komponente B
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Construction chemicals
Manufacturers & Suppliers
MC-Bauchemie Müller GmbH & Co. KG
manufacturer
Am Kruppwald 1-8, D-46238 Bottrop
++49(0)2041-101-0
Emergency Contacts
Emergency Contact
++49(0)178 310 10 43
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture consisting of the following components.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| disodium peroxodisulphate EC: 231-892-1 | 7775-27-1 | 25 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air and call for doctor for safety reasons. In case of unconsciousness bring patient into stable side position for transport.
Instantly wash with water and soap and rinse thoroughly.
Call a doctor immediately. Rinse opened eye for several minutes under running water. Then consult a doctor.
Instantly call for doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder or water jet. Fight larger fires with water jet or alcohol-resistant foam.
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Not required.
No special measures required.
Dispose of contaminated material as waste according to item 13.
Related Products
Similar products with comparable safety profiles
MC-Injekt GL-95 TX - Komponente B 1
---
MC-Injekt GL-95 TR - Komponente A 2
---
MC-Injekt GL-95 - Komponente A 3
---
MC-Injekt GL-95 - Komponente A 1
---
MC-Injekt 2300 top - Komponente B
---
MC-Injekt 1264 compact - Komponente B
---
MC-Injekt 1264 compact - Komponente A
---
ERC carbamin 5100 Super Konzentrat
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Prevent formation of dust.
No special requirements.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. After use of gloves apply skin-cleaning agents and skin cosmetics. Material of gloves: Nitrile rubber, NBR. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed safety glasses.
In case of brief exposure or low pollution use breathing filter apparatus. In case of intensive or longer exposure use breathing apparatus that is independent of circulating air.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Korrosionswirkung auf Gebrauchsmetalle. Feuergefahr bei Berührung mit brennbaren Stoffen.
No further relevant information available.
No further relevant information available.
Possible in traces. SO3 - Sauerstoff
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1505
- Shipping Name
- SODIUM PERSULPHATE
- Transport Class
- 5.1
- Packing Group
- III
Warning: Oxidising substances.
Warning: Oxidising substances.
Warning: Oxidising substances.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MC-Injekt GL-95 TX TR - Komponente B?
The signal word is danger.
What is the physical form of MC-Injekt GL-95 TX TR - Komponente B?
MC-Injekt GL-95 TX TR - Komponente B is a powder appearing as colourless with colourless color. It has odourless odor.
What is MC-Injekt GL-95 TX TR - Komponente B used for?
Construction chemicals
What are the hazard statements for MC-Injekt GL-95 TX TR - Komponente B?
This substance has 4 hazard statements:
- H272: May intensify fire; oxidiser.
- H302: Harmful if swallowed.
- H317: May cause an allergic skin reaction.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
What is the melting point of MC-Injekt GL-95 TX TR - Komponente B?
The melting point is 200 Zersetzung °C and the boiling point is Not determined Not applicable.