Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Kemgard® 605
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Smoke suppressant
Uses advised against
None known.
Manufacturers & Suppliers
J.M. Huber Corporation
manufacturer
3100 Cumberland Boulevard, Suite 600, Atlanta, GA 30339 USA
+1 678 247-7300
http://www.hubermaterials.com
Emergency Contacts
CHEMTREC
+1 800 424 9300
CHEMTREC
+1 703 527 3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Proprietary Ingredients | --- | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Do not breathe dust. If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.
Wash with plenty of soap and water.
Symptoms: Contact with dust can cause mechanical irritation or drying of the skin.
In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Symptoms: Dust contact with the eyes can lead to mechanical irritation.
Rinse mouth thoroughly with water.
Immediate Medical Attention
Treatment should be symptomatic and supportive.
Medical Treatment
Treatment should be symptomatic and supportive.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog). Dry chemical. Foam. Carbon dioxide (CO2).
None known.
None known.
Water mist may be used to cool closed containers. No special fire protection measures are necessary. Standard procedure for chemical fires.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep unauthorized personnel away. Avoid dust formation. Ensure adequate ventilation. Use personal protection recommended in Section 8.
Vacuum or sweep material and place in a disposal container
Do not dry sweep dust. Wet dust with water before sweeping or use a vacuum to collect dust
Avoid runoff to waterways and sewers.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid exposure - obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Minimize dust generation and accumulation. Do not breathe dust. Wear appropriate personal protective clothing to prevent skin contact.
Keep container tightly closed and dry. Store away from incompatible materials.
Handle in accordance with good industrial hygiene and safety practice.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide a good standard of controlled ventilation (5 to 10 air changes per hour). Use exhaust ventilation to keep airborne concentrations below exposure limits. In case of insufficient ventilation, wear suitable respiratory equipment.
For operations where prolonged or repeated skin contact may occur, impervious gloves should be worn.
Wear safety glasses with side shields (or goggles).
In case of inadequate ventilation wear respiratory protection.
Wear suitable protective clothing.
Dispose of in accordance with local regulations.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
Stable under normal conditions
No specific hazard known
Incompatible materials Dust formation
None known
None known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Kemgard® 605?
The signal word is no signal word.
What is the physical form of Kemgard® 605?
Kemgard® 605 is a solid powder appearing as white to off-white with white to off-white color. It has odorless odor.
What is Kemgard® 605 used for?
Smoke suppressant
What is the melting point of Kemgard® 605?
The melting point is Not applicable and the boiling point is Not applicable.