Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- KEMPEROL 120 / 165 / 200 / 500 / GV Fleece
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
intended for professional use only!, Additional component, Waterproofing
Manufacturers & Suppliers
KEMPER SYSTEM GmbH & Co. KG
manufacturer
Holländische Strasse 32-36, 34246 Vellmar, Deutschland / Germany
+49 (0)561 / 8295-0
Emergency Contacts
Giftinformationszentrum der Länder Rheinland-Pfalz und Hessen
+49 (0)6131 / 19 24 0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Non-dangerous ingredients (solid)
For the wording of the listed hazard phrases refer to section 16
Notes
Dangerous components: Void
First Aid Measures
Emergency procedures for chemical exposure incidents
Seek medical treatment in case of complaints.
Seek medical treatment.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor. Protect unharmed eye.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions.
CO2
Firefighter Protection
Do not inhale explosion gases or combustion gases.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Inform respective authorities in case of seepage into water course or sewage system.
Send for recovery or disposal in suitable receptacles.
Related Products
Similar products with comparable safety profiles
KEMPEROL 2K-PUR (B)
---
KEMPEROL 2K-PUR (A)
---
Kemgard® 605
---
KEMPERTEC EP5-Primer (B)
---
KEMTEX PREFILL GAS - SOLVENT 300 ML
---
Meropa® 68, 100, 150, 220, 320, 460
---
Products group 200 from Von Roll Switzerland Ltd., like Thermopreg, Epoflex, Polyesterfleece, Polyesterfelt, Semi-conductive Corona Protection Tape, Glasoflex, Vetrotex, Vetroflex, Trial Samples with similar composition. All products from the group 200.
---
K-FLEX K-467
UFI: 3XF1-R018-V00W-J0WD
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special measures required.
Store in dry conditions. Protect from humidity and water.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. Only use chemical-protective gloves with CE-labelling of category III. Check protective gloves prior to each use for their proper condition. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. After use of gloves apply skin-cleaning agents and skin cosmetics. Recommended materials: Nitrile rubber, NBR. Recommended thickness of the material: ≥ 0.1 mm. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Penetration time: The determined penetration times according to EN 374 part III are not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50% of the penetration time, is recommended.
Tightly sealed goggles. Protective goggles and facial protection - Classification according to EN 166
When used properly and under normal conditions, breathing protection is not required. Use suitable respiratory protective device in case of insufficient ventilation. Filter A/P2. Respiratory protection - Gas filters and combination filters according to EN 141
Protective work clothing. Impervious protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Smaller quantities can be disposed of with household waste. Disposal according to official regulations
Smaller quantities can be disposed of with household waste. Disposal according to official regulations
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Void
- Shipping Name
- Void
- Transport Class
- Class
- Packing Group
- Void
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for KEMPEROL 120 / 165 / 200 / 500 / GV Fleece?
The signal word is no signal word.
What is the physical form of KEMPEROL 120 / 165 / 200 / 500 / GV Fleece?
KEMPEROL 120 / 165 / 200 / 500 / GV Fleece is a solid with white color. It has characteristic odor.
What is KEMPEROL 120 / 165 / 200 / 500 / GV Fleece used for?
intended for professional use only!, Additional component, Waterproofing
What is the melting point of KEMPEROL 120 / 165 / 200 / 500 / GV Fleece?
The melting point is Undetermined. and the boiling point is Undetermined..