Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Getinge Clean Chamber Foam
- Product Form
- Foam based
- Product Code
- XV1661
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- HWW4-R0YH-C00A-5R3P
Identified Uses
Foam based product for effective descaling and removal of mineral deposits from stainless steel internal surfaces of Getinge autoclaves, washer-disinfectors and flusher-disinfectors.
Uses advised against
Do not apply to hot surfaces or acid sensitive materials.
Manufacturers & Suppliers
Quadralene Limited
national supplier
Unit 3, Andressey Way, Derby, DE21 6YH, UNITED KINGDOM
+44 (0)1332 292500
www.getinge.com
Getinge Australia (NZ Branch)
national supplier
600 Great South Road, Building B, Level 2, Ellerslie, Auckland 1051, NEW ZEALAND
0800 1 438 464
Getinge Australia Pty Ltd
national supplier
Suite 701, Level 7, 11 Help Street, Chatswood, NSW 2067, AUSTRALIA
1800 438 464
Emergency Contacts
Europe
+44 1235 239670
Africa/South Africa
+27 21 300 2732
Middle East/Africa
+44 1235 239671
Asia/Pacific
+65 3165 2217
Australia
18000 74234
New Zealand
0800 446 881
Japan
0120 015 230
China
400 120 6011
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If irritation occurs, remove to fresh air, keep warm and at rest, seek medical attention immediately.
Symptoms: Breathing spray mist may cause irritation.
Remove contaminated clothing, wash skin with water and seek medical attention immediately.
Symptoms: Will cause severe irritation and damage.
Immediately flush eyes with water, holding eyelids apart, for at least 10 minutes. Seek medical assistance immediately.
Symptoms: Causes burns.
Do not induce vomiting. If conscious, give water to drink. Seek medical assistance immediately.
Immediate Medical Attention
Seek medical assistance immediately.
Medical Treatment
No special treatment or attention required additional to section 4.2.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
As appropriate for the fire.
No specific hazards arising from the mixture.
No special measures arising from the mixture.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Take precautions to avoid contact. Use personal protective equipment as detailed in section 8. Spillage may make floors slippery. Keep the area clear. Observe regulations.
Small quantities, flush to foul sewer with a large quantity of water.
Large quantities, contain and absorb or pump into suitable containers for disposal.
Prevent spills from entering water courses.
Small quantities, flush to foul sewer with a large quantity of water. Large quantities, contain and absorb or pump into suitable containers for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not mix with other products. Observe good industrial hygiene. Wear correct PPE. Do not apply to hot surfaces. Rinse thoroughly. Intended for use on stainless steel only. Autoclaves: Avoid product entering drain.
Store in a cool, dry place protected from frost and away from alkalis and strong oxidizing agents. Store upright in original containers. Recommended storage temperature 5–25°C.
Observe good industrial hygiene.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use in a well ventilated area
Wear pvc or latex gloves. Exact choice of glove depends on specific risk assessments.
Wear eye protection appropriate to the process according to BS EN 166.
avoid breathing spray mist, wear a protective mask to EN149 if necessary.
As necessary to prevent contact.
Prevent mixture from entering water courses.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Incompatible with strong oxidizing agents and alkalis.
No hazardous reactions are expected to occur.
Extremes of temperature.
Incompatible with strong oxidizing agents and alkalis.
None known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Getinge Clean Chamber Foam?
The signal word is danger.
What is the physical form of Getinge Clean Chamber Foam?
Getinge Clean Chamber Foam is a liquid with colorless color. It has acidic odor.
What is the solubility of Getinge Clean Chamber Foam?
Miscible with water
What is Getinge Clean Chamber Foam used for?
Foam based product for effective descaling and removal of mineral deposits from stainless steel internal surfaces of Getinge autoclaves, washer-disinfectors and flusher-disinfectors.
What are the hazard statements for Getinge Clean Chamber Foam?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.