Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Getinge Clean Chamber Foam
- Product Form
- Foam based product
- Product Code
- XV1661
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
effective descaling and removal of mineral deposits from stainless steel internal surfaces of Getinge autoclaves, washer-disinfectors and flusher-disinfectors.
Uses advised against
Do not apply to hot surfaces or acid sensitive materials.
Manufacturers & Suppliers
Getinge Disinfection AB
manufacturer
Ljungadalsgatan 11, Box 1505, SE-351 15 Växjö, Sweden
+46 (0)10 335 98 00
http://www.getinge.com
Getinge Australia (NZ Branch)
distributor
600 Great South Road, Building B, Level 2, Ellerslie, Auckland 1051, New Zealand
0800 1 438 4643
Getinge Australia Pty Ltd
distributor
1/160 Lytton Road, Morningside, QLD 4170, Australia
1800 438 464
Emergency Contacts
EU
+44 (0) 123 523 96 70
Australia
+61 280 144 558
Japan
+81 345 789 341
China
+86 105 100 30 39
Middle East
+44 (0) 123 523 96 71
New Zealand
+64 992 914 83
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If irritation occurs, remove to fresh air, keep warm and at rest.
Symptoms: Breathing spray mist may cause irritation.
Remove contaminated clothing, wash skin with water.
Symptoms: Will cause severe irritation and damage.
Immediately flush eyes with water, holding eyelids apart, for at least 10 minutes.
Symptoms: Causes burns.
Do not induce vomiting. If conscious, give water to drink.
Immediate Medical Attention
Seek medical assistance immediately.
Medical Treatment
No special treatment or attention required additional to section 4.2.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
No special requirements. As appropriate for the fire.
No specific hazards arising from the mixture.
No special measures arising from the mixture.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Take precautions to avoid contact. Spillage may make floors slippery. Keep the area clear. Observe regulations.
flush to foul sewer with a large quantity of water.
contain and absorb or pump into suitable containers for disposal.
Prevent spills from entering water courses.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not mix with other products. Observe good industrial hygiene.
Store in a cool, dry place protected from frost. Store upright in original containers.
Observe good industrial hygiene.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use in a well ventilated area
Wear pvc or latex gloves. Exact choice of glove depends on specific risk assessments.
Wear eye protection appropriate to the process according to BS EN 166.
avoid breathing spray mist, wear a protective mask to EN149 if necessary.
As necessary to prevent contact.
Prevent mixture from entering water courses.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Incompatible with strong oxidising agents and alkalis.
No hazardous reactions are expected to occur.
Extremes of temperature.
Incompatible with strong oxidising agents and alkalis.
None known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
May affect aquatic organisms due to low pH if released into water courses untreated.
12.2 Persistence and degradability
All organic ingredients are biodegradable when well diluted. Surfactants used comply with biodegradation criteria.
12.3 Bioaccumulative potential
Not expected to bioaccumulate.
12.4 Mobility in soil
The product has high water solubility, indicating potential for high mobility in soil.
12.5 Results of PBT and vPvB assessment
The substance contains no ingredients classified as PBT or vPvB.
12.6 Other adverse effects
No other adverse effects are anticipated.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Process effluent can normally be discharged to foul sewer (subject to consent limits).
Dispose of surplus product via a licenced chemical waste contractor.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The surfactant(s) contained in this preparation comply with the biodegradability criteria laid down in Regulation (EC) No. 648/2004 on detergents.
Data to support this assertion are held at the disposal of the competent authorities of the member states and will be made available to them at their direct request.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Getinge Clean Chamber Foam?
The signal word is danger.
What is the physical form of Getinge Clean Chamber Foam?
Getinge Clean Chamber Foam is a liquid appearing as hazy liquid . It has acidic odor.
What is the solubility of Getinge Clean Chamber Foam?
Miscible with water
What is Getinge Clean Chamber Foam used for?
effective descaling and removal of mineral deposits from stainless steel internal surfaces of Getinge autoclaves, washer-disinfectors and flusher-disinfectors.
What are the hazard statements for Getinge Clean Chamber Foam?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.