RIDGID High Performance Thread Cutting Oil

Not thought to be a concern during normal conditions if use. Ensure proper ventilation is sought when handling any industrial chemical or lubricant.

As for all industrial processes, it is advised to wash hands and skin with soap and water after use and apply barrier cream.

Symptoms: There may be mild irritation at the site of contact.

Bathe the eye with running water for 15 minutes.

Symptoms: There may be irritation and redness.

Wash out mouth with water. Give 1 cup of water to drink every 10 minutes.

Symptoms: There may be irritation of the throat.

Suitable extinguishing media for the surrounding fire should be used.

In combustion emits toxic fumes.

Use water spray to cool containers.

Turn leaking containers leak-side up to prevent the escape of liquid.

Do not discharge into drains or rivers. Contain the spillage using bunding.

Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for disposal by an appropriate method.

Ensure there is sufficient ventilation of the area.

Store in a cool, well ventilated area. Keep container tightly closed.

Ensure there is sufficient ventilation of the area.

After use, please wash hands with soap and water and apply barrier cream if available.

If appropriate, it is always good practice to wear safety glasses when handling any industrial lubricant.

Respiratory protection not required.

Wear protective clothing and equipment appropriate for the risk of exposure. Be aware of other hazards such as "rotating parts". Contact health and safety professional or manufacturer for specific information.

No special requirement.

Stable under normal conditions.

Stable under recommended transport or storage conditions.

Hazardous reactions will not occur under normal transport or storage conditions. Decomposition may occur on exposure to conditions or materials listed below.

Extremes of Temperature

Strong oxidising agents. Strong acids.

In combustion emits toxic fumes.