Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PRI NHFSS POPCORN E25267272
- Product Code
- K246903000
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Perfume composition, flavor, aromatic ingredient, or blends of food additives and ingredients, for industrial use, which may be used in end-user products
Manufacturers & Suppliers
MANE IBERICA, SA
manufacturer
Carretera de Molins de Rei a Sabadell, km13.3- 08191 Rubí-SPAIN
(34) 93 588 12 21
Emergency Contacts
NCEC (regional)
+44 1865 407333
Official advisory body number
070245245
NCEC (Middle East/Africa)
+44 1235 239671
NCEC (Americas)
+1 215 207 0061
NCEC (Asia)
+65 3158 1074
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hazardous Substances: No recommendation given. Ingredients having an occupational exposure limit value: See section 8.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Remove/take off immediately all contaminated clothing. Rinse skin with water/shower.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Rinse mouth. Do NOT induce vomiting.
Immediate Medical Attention
Get medical attention if symptoms persist.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, CO2 or Foam
Avoid water in straight hose stream; will scatter and spread fire.
Avoid breathing dust or vapor.
Cool containers exposed to flames with water until well after the fire is out.
Firefighter Protection
No specific precautions.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Contain spillages with sand, earth or any suitable adsorbent material.
Dike for large spills.
There must be no release into the environment.
Collect with non-combustible absorbent material. Flush with water.
Materials: non-combustible absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Extinguish all ignition sources. Avoid sparks, flames, heat and smoking. Ventilate. Do not breathe vapor from heated material.
Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures. Keep only in the original container in an appropriate place.
Extinguish all ignition sources. Avoid sparks, flames, heat and smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use chemical resistant gloves in accordance with Standard EN 374 for protective gloves against chemicals. When prolonged or frequently repeated contact may occur, a glove with a protection class of 4 or higher (breakthrough time greater than 120 minutes according to Standard EN 374) is recommended. When only brief contact is expected, a glove with a protection class of 1 or higher (breakthrough time greater than 10 minutes according to Standard EN 374) is recommended. Thickness > or = 0.2 mm. Please observe the instructions regarding permeability and breakthrough time which are provided by the glove supplier. Permeation time must exceed contact time. Choose the type of gloves according to the chemical properties of the products being handled. Change gloves according to the manufacturer's recommendations or if they are damaged.
Use safety glasses or a face shield according to Standard EN 166 and according to the hazard analysis specific to the workplace (chemical to be handled, protocol for use, frequency of use, quantity used, etc.).
In the event that ventilation is not sufficient to prevent inhalation of substances or reduce airborne concentrations below an established occupational exposure limit, use an adequate respiratory apparatus to supplement the engineering measures already in place. These recommendations must be adapted according to the hazard analysis specific to the workplace.
Wear protective clothing covering the arms and legs. Use an apron or full suit if exposure is expected. These recommendations must be adapted according to the hazard analysis specific to the workplace.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal temperature conditions and recommended use.
No data available.
No data available.
Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures.
No data available.
No data available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PRI NHFSS POPCORN E25267272?
The signal word is no signal word.
What is the physical form of PRI NHFSS POPCORN E25267272?
PRI NHFSS POPCORN E25267272 is a powder appearing as from off white to off white with from off white to off white color. It has characteristic odor.
What is PRI NHFSS POPCORN E25267272 used for?
Perfume composition, flavor, aromatic ingredient, or blends of food additives and ingredients, for industrial use, which may be used in end-user products