Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- KERALUBE PASTA (Listed NSF H1: n 163924)
- Product Code
- 00770001
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Life cycle stages PW Widespread use by professional workers; Sector of Use SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); Product category PC24 Lubricants, greases, release products; Process category PROC10 Roller application or brushing; Application of the substance / the mixture Lubricant
Manufacturers & Suppliers
ZEP ITALIA SRL
manufacturer
Piazzale Luigi Cadorna, 2, 20123 Milano (MI) - Italy; Via Nettunense Km. 25.000, 04011 Aprilia (LT) - Italy
+39.06.926691
http://www.zep.it
ZEP Industries BV
manufacturer
Vierlinghweg 30, 4612 PN Bergen op Zoom, The Netherlands
+ 31 164 250 100
ZEP Industries BV
manufacturer
Vierlinghweg 30, 4612 PN Bergen op Zoom, The Netherlands
+ 32 2 347 0117
ZEP UK Ltd
distributor
Tanhouse Lane, Widnes Cheshire, WA8 0RD, United Kingdom
+44 (0)151 422 1000
http://www.zep.co.uk
Emergency Contacts
NHS
+44 0845 46 47
NHS
+44 08454 24 24 24
emergency number (europe)
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishing methods suitable to surrounding conditions. CO2, powder or water spray. Fight larger fires with water spray.
Do not inhale explosion gases or combustion gases.
Firefighter Protection
Wear self-contained respiratory protective device. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons from danger area. Keep unprotected persons away.
Do not allow to enter sewers/ surface or ground water.
Pick up mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Store in cool, dry place in tightly closed receptacles.
Store in cool, dry place in tightly closed receptacles.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Protective gloves. Material of gloves: PVC gloves. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses
Not necessary if room is well-ventilated.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for KERALUBE PASTA (Listed NSF H1: n 163924)?
The signal word is no signal word.
What is the physical form of KERALUBE PASTA (Listed NSF H1: n 163924)?
KERALUBE PASTA (Listed NSF H1: n 163924) is a solid appearing as white, pasty with white color. It has characteristic odor.
What is the solubility of KERALUBE PASTA (Listed NSF H1: n 163924)?
Insoluble.
What is KERALUBE PASTA (Listed NSF H1: n 163924) used for?
Life cycle stages PW Widespread use by professional workers; Sector of Use SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); Product category PC24 Lubricants, greases, release products; Process category PROC10 Roller application or brushing; Application of the substance / the mixture Lubricant
What is the melting point of KERALUBE PASTA (Listed NSF H1: n 163924)?
The melting point is Not available. Reason for lack of data: Not relevant for product characterisation and the boiling point is >150 °C.