Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MFX3001 - MAGICFX® Pro Bubble Fluid – Ready to use 5L / MFX3003 - MAGICFX® Pro Bubble Fluid – Ready to use 20L
- Product Code
- MFX3001, MFX3003
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Soap bubbles. For professional use only.
Uses advised against
Please consult manufacturer.
Manufacturers & Suppliers
Magic FX B.V.
manufacturer
Schouwrooij 27, NL-5281 RE Boxtel
+31 (0)411-748100
http://www.magicfx.eu
MAGIC FX
manufacturer
+31 (0)411 74 81 00
Emergency Contacts
MAGIC FX
+31 (0)411 74 81 00
During office hours
National Poisoning Information Center (NL)
+31(0)30 274 8888
Belgium Anti Poison Center
+32(0)70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| bronopol (INN);2-bromo-2-nitropropane-1,3-diol EC: 200-143-0 | 52-52-7 | 0.05% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
There are no special measures required.
Product is not classified skin irritant. Flush with water.
Remove contact lenses. Rinse open eyes immediately and long enough with plenty of water.
If swallowed do not induce vomiting. If possible give defoaming pharmaceutical against flatulences, e.g. Lefax®, Espumisan®, etc. Immediately wash out mouth thoroughly with water and rinse water back out.
Immediate Medical Attention
In all cases, after cleaning, medical advice should be consulted as quickly as possible with the MSDS. For persistent symptoms, consult an oculist.
Medical Treatment
If possible give defoaming pharmaceutical against flatulences, e.g. Lefax®, Espumisan®, etc.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Not applicable; product is non-flammable.
Not applicable; product is non-flammable.
Fire will result in dense smoke. Exposure to combustion products may harm your health.
Adapt firefighting measures on surrounding fire.
Firefighter Protection
Closed containers, which are exposed to fire, should be cooled with water.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
See section 7/8.
Prevent that a large quantity of product enters drains/surface, water/ground-water or soil/subsoil.
cleaning should be performed with normal cleaning agents. Avoid use of solvents.
Related Products
Similar products with comparable safety profiles
MFX3027 - SMOKEBUBBLE BLASTER Smoke Fluid
---
EUROLITE Smoke fluid -A2D- Action smoke fluid, EUROLITE Smoke fluid -B2D- basic, EUROLITE Smoke fluid -C2D- standard, EUROLITE Smoke fluid -P2D- professional, EUROLITE Smoke fluid -E2D- extreme
---
Fog liquid "Unique-Fluid", "Tiny-Fluid"
---
KEMTEX PREFILL GAS - SOLVENT 300 ML
---
TECHNOMELT DM 3421UV EASYFLOW BX-12KG
---
LOCTITE MF R301 known as MFR301 5 GALLON
---
MAGIC FOAM
---
LubriFluid F100
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Smoking, drinking and consumption of food is not allowed in the work area.
Keep away from heat and direct sunlight and frost. Store in a cool and dark place to ensure the product quality. Keep container tightly closed.
Smoking, drinking and consumption of food is not allowed in the work area.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Apply standard precautions during use of the product. Avoid inhalation of vapours.
In case of permanent exposure over long periods of time, the use of 0.08 Latex gloves is advised.
In case of permanent exposure over long periods of time, the use of EN 166 approved safety glasses with side shields is advised.
No specific requirements
No specific requirements.
No specific requirements. Not available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
None.
The product is not degraded when used as specified in section 1.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
Based on available data, the classification criteria are not met.
12.3 Bioaccumulative potential
Based on available data, the classification criteria are not met.
12.4 Mobility in soil
No data available.
12.5 Results of PBT and vPvB assessment
The mixture/product does not contain any substances known to fulfil the criteria for PBT and vPvB classification.
12.6 Endocrine disrupting properties
The mixture/product does not contain any substances considered to have endocrine-disrupting properties in relation to the environment.
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Labelling according to EC directive: No labelling required. The classification has been assessed following the conventional method of Regulation (EC) No 1272/2008 (CLP).
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MFX3001 - MAGICFX® Pro Bubble Fluid – Ready to use 5L / MFX3003 - MAGICFX® Pro Bubble Fluid – Ready to use 20L?
The signal word is no signal word.
What is the physical form of MFX3001 - MAGICFX® Pro Bubble Fluid – Ready to use 5L / MFX3003 - MAGICFX® Pro Bubble Fluid – Ready to use 20L?
MFX3001 - MAGICFX® Pro Bubble Fluid – Ready to use 5L / MFX3003 - MAGICFX® Pro Bubble Fluid – Ready to use 20L is a liquid appearing as colourless to slightly yellow, transparent viscous liquid with colourless to slightly yellow color. It has odourless, some samples of product-specific odour odor.
What is the solubility of MFX3001 - MAGICFX® Pro Bubble Fluid – Ready to use 5L / MFX3003 - MAGICFX® Pro Bubble Fluid – Ready to use 20L?
Completely soluble
What is MFX3001 - MAGICFX® Pro Bubble Fluid – Ready to use 5L / MFX3003 - MAGICFX® Pro Bubble Fluid – Ready to use 20L used for?
Soap bubbles. For professional use only.
What is the melting point of MFX3001 - MAGICFX® Pro Bubble Fluid – Ready to use 5L / MFX3003 - MAGICFX® Pro Bubble Fluid – Ready to use 20L?
The melting point is Not determined, due to composition: -4 to 0°C. and the boiling point is Not determined, due to composition: 100 to 102 °C..