Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CLR Brands® Septic System
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Wastewater remediation.
Manufacturers & Suppliers
Osprey Biotechnics
manufacturer
1845 57th Street, Sarasota, FL 34243
941-351-2700
Emergency Contacts
Chemtrec
1-800-424-9300
Chemtrec
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with non-hazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Water, distilled water, deionized water | 7732-18-5 | 90 - 99% | No |
Notes
Non-hazardous components: 7732-18-5 Water, distilled water, deionized water | 90-99%
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water.
Rinse out mouth and then drink plenty of water.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO₂, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
No further relevant information is available.
No further relevant information available.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Not required.
No special measures required.
Absorb with liquid-binding material (i.e. sand, diatomite, acid binders, universal binders, sawdust).
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
SCR AB Flush
---
CRC® Brakleen® Brake Parts Cleaner, SCAQMD #1171 Compliant, 14 Wt Oz
---
Clinell Drain Disinfectant
---
03405 -1430 CERTIFIED BRAKE CLEANER NON-CHLORINATED (CCCR)
---
Case Akcela Hy-Tran Ultraction SSL
---
CERECLOR™ S40/S45/S45SS/S50/S52/S52HV/S52SS/51L/S54/S55/S56/S58/S60/S63
CAS: 085535-85-9
ROCIMA™ MBX Biocide
---
Rectorseal® Tru-Blue™
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special measures required.
Store in the original container.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Not required. Material of gloves: Not required. Penetration time of glove material: Not applicable.
Not required.
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CLR Brands® Septic System?
The signal word is no signal word.
What is the physical form of CLR Brands® Septic System?
CLR Brands® Septic System is a liquid appearing as light blue with light blue color. It has odorless odor.
What is CLR Brands® Septic System used for?
Wastewater remediation.
What are the hazard statements for CLR Brands® Septic System?
This substance has 1 hazard statement:
- Non-Regulated Material
What is the melting point of CLR Brands® Septic System?
The melting point is Not determined. and the boiling point is 100 °C (212 °F).