Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- OC-Auto Sampling Bottle 3
- Product Code
- VCPZ25, VCPZ26, VCPZ27, VCPZ28, VCPZ29, G-PZ15, VKPZ20, VMPZ20, VMPZ21, VTPZ10
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Eiken Chemical Co., Ltd.
manufacturer
4-19-9, Taito, Taito-ku, Tokyo 110-8408, JAPAN
+81-3-5846-3479
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
PBS Buffer 50mM; Sodium Azide < 0.1% (CAS No.: 26628-22-8)
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| PBS Buffer 50mM | --- | --- | No |
| Sodium Azide | 26628-22-8 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Wash with plenty of water.
Rinse cautiously with water for 15 minutes or longer.
Fully rinse mouth out with water.
Immediate Medical Attention
If skin irritation occurs, seek medical advice/attention. If eye irritation persists, get medical advice/attention. If you feel unwell, seek medical advice/treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, powder, CO₂, foam
Shut off the source of the fire. Use water, powder, CO₂ or other extinguishing media as appropriate for the nature of the blaze. In order to avoid inhaling the gases or smoke produced during combustion, extinguish the fire from an upwind position and wear breathing protection equipment.
Firefighter Protection
wear breathing protection equipment
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use caution, as the area where the solution was spilled will be slippery.
Do not dispose of the spilled or leaked solution directly into a river or sewer. Pour out the solution together with a large volume of water.
Wipe up the solution with a waste or disposable cloth. Then wash it away with a large volume of water.
Materials: waste or disposable cloth
Related Products
Similar products with comparable safety profiles
BactT/ALERT® FA Bottle, BacT/ALERT® FN Bottle, BacT/ALERT® PF Bottle, BacT/ALERT® SA Bottle, BacT/ALERT® SN Bottle, BacT/ALERT® MP Bottle, BacT/ALERT® MB Bottle
---
DCA-4 Liquid
---
Sample Preparation Apparatus II/Negative Control III and Sample Preparation Apparatus III
---
DuoSet Ancillary Reagent Kit 3, 5 Plate
---
FOB Gold CALIBRATOR Lyoph. x 2 mL
---
Wash Buffer 3
---
COLORMATIC PRE-FILL STANDARD 275 ML
---
LCK 304 Ammonium, Sample cuvette
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin, mucous membranes, or clothes. Avoid getting into eyes. Wash hands thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This product is stable with regard to heat, light, and physical impact.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Observe the contents of the “HANDLING AND STORAGE”. In addition, do not stack in such a way that the containers are damaged, and take steps to prevent possible cargo collapse.
Observe the contents of the “HANDLING AND STORAGE”. In addition, do not stack in such a way that the containers are damaged, and take steps to prevent possible cargo collapse.
Observe the contents of the “HANDLING AND STORAGE”. In addition, do not stack in such a way that the containers are damaged, and take steps to prevent possible cargo collapse.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for OC-Auto Sampling Bottle 3?
The signal word is no signal word.
What is the physical form of OC-Auto Sampling Bottle 3?
OC-Auto Sampling Bottle 3 is a liquid with clear and colorless color. It has odorless odor.
What is the solubility of OC-Auto Sampling Bottle 3?
The components are highly soluble in water.
What are the hazard statements for OC-Auto Sampling Bottle 3?
This substance has 4 hazard statements:
- Under normal conditions of use, this product presents no danger.
- This product contains the harmful ingredient, although it is extremely small amounts.
- There is no particular environmental effect.
- There is no physical or chemical hazard.