Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Figure 4 HI TEMP 300-AMB
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For use in Figure 4 systems
Manufacturers & Suppliers
3D Systems, Inc.
manufacturer
333 Three D Systems Circle, Rock Hill, South Carolina U.S.A.
803.326.3900
3D Systems, Inc.
manufacturer
333 Three D Systems Circle, Rock Hill, South Carolina U.S.A.
800.793.3669
3D Systems Europe Ltd.
manufacturer
Mark House, Mark Road, Hemel Hempstead, Herts HP2 7 United Kingdom
+44 144-2282600
3D Systems / Australia
manufacturer
5 Lynch Street, Hawthorn, VIC 3122
+1 03 9819-4422
Emergency Contacts
Chemtrec
800.424.9300
Chemtrec
+1 703.527.3887
Aus Chemtrec
+(61) 29037.2994
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Tris(2-hydroxyethyl) isocyanurate triacrylate EC: 254-843-6 | 40220-08-4 | 20 - 40% | Yes |
| 2-Propenoic acid, 1,1'-[(octahydro-4,7methano-1H-indene-5,7-diyl)bis(methylene)] ester EC: 255-901-3 | 42594-17-2 | 5 - 30% | Yes |
| 1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3,5-tri-2-propenyl- EC: 213-834-7 | 1025-15-6 | 20 - 40% | Yes |
| Phenyl bis(2,4,6-trimethylbenzoyl)-phosphine oxide EC: 423-340-5 | 162881-26-7 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move affected person to fresh air.
Symptoms: Respiratory irritation.
Immediately flush skin with plenty of soap and water. Remove contaminated clothing and shoes. Wash clothing before reuse.
Symptoms: May cause irritation or sensitization by skin contact, including redness and/or swelling.
Immediately flush eyes with plenty of water for at least 15 minutes.
Symptoms: Irritating to eyes. Causes redness, swelling and pain.
Drink plenty of water.
Symptoms: Irritating to mouth, throat and stomach.
Immediate Medical Attention
If respiratory irritation occurs, if breathing becomes difficult seek medical attention immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water mist, dry chemical, carbon dioxide, or appropriate foam.
High volume water jet
Thermal decomposition products can include CO₂, CO, NOₓ and smoke.
Move container from area if it can be done without risk. Cool containers with water spray.
Firefighter Protection
Avoid inhalation of material or combustion by-products.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep unnecessary personnel away. Consult expert immediately.
Stop the flow of material, if this is without risk. Ventilate contaminated area. Eliminate sources of ignition. In case of contamination of aquatic environment inform local authorities.
Absorb spillage with suitable absorbent materials. Place all waste in an appropriate container for disposal.
Materials: suitable absorbent materials
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide adequate ventilation. Use suitable protective equipment. Avoid contact with skin and eyes. Do not breathe vapors or mist. Avoid ignition sources.
Store sealed in the original container at room temperature. Keep this material indoors in a cool, dry, well ventilated place. Store out of direct sunlight or UV light sources.
Avoid contact with skin and eyes.
Avoid ignition sources.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only with machines that have exhaust ventilation capability.
Use impervious nitrile gloves.
Wear safety glasses or chemical goggles.
If ventilation cannot effectively keep vapor concentrations below established limits, appropriate certified respiratory protection must be provided (e.g. 3M 6000 with organic vapor cartridge A2 or half mask 3M 4251).
Use apron and closed shoes.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Avoid exposure to heat and light. Take necessary actions to avoid static electricity discharge.
Oxidizing materials, strong acids and strong bases.
Carbon dioxide, carbon monoxide and other toxic fumes can be released at high temperatures or upon burning.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Figure 4 HI TEMP 300-AMB?
The signal word is danger.
What is the physical form of Figure 4 HI TEMP 300-AMB?
Figure 4 HI TEMP 300-AMB is a liquid with yellow color. It has mild acrylate odor.
What is Figure 4 HI TEMP 300-AMB used for?
For use in Figure 4 systems
What are the hazard statements for Figure 4 HI TEMP 300-AMB?
This substance has 5 hazard statements:
- H302: Harmful if swallowed
- H317: May cause an allergic skin reaction
- H318: Causes serious eye damage
- H373: May cause damage to organs through prolonged or repeated exposure
- H412: Harmful to aquatic life with long-lasting effect