Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- VIRKON S
- Product Code
- 000000000057747484
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Disinfectants
Manufacturers & Suppliers
NRM
manufacturer
535 Wairakei Road, Burnside, Christchurch, 8140 NZ
0800800380
Emergency Contacts
NZ Poisons Information Centre
0800 764766
24-hour Medical Emergency
0800 111174
Transport Emergency
0800 658080
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| pentapotassium bis(peroxymonosulphate)<br>bis(sulphate) | 70693-62-8 | 30 - 50% | No |
| Polyphosphoric acids,sodium salts | 68915-31-1 | 20 - 30% | No |
| Benzenesulfonic acid, C10-13-alkyl derivs.,<br>sodiumsalts | 68411-30-3 | 10 - 20% | No |
| malic acid | 6915-15-7 | 1 - 10% | No |
| sulphamidic acid | 5329-14-6 | 3 - 5% | No |
| potassium hydrogensulphate | 7646-93-7 | 1 - 3% | No |
| sodiumtoluenesulphonate | 12068-03-0 | 1 - 10% | No |
| sodiumchloride | 7647-14-5 | 1 - 10% | No |
| dipotassiumperoxodisulphate | 7727-21-1 | 0.1 - 1% | No |
| dipentene | 138-86-3 | 0.1 - 0.25% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.
If skin irritation persists, call a physician. If on skin, rinse well with water. If on clothes, remove clothes.
Symptoms: Causes skin irritation.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Continue rinsing eyes during transport to hospital. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Symptoms: Small amounts splashed into eyes can cause irreversible tissue damage and blindness. Causes serious eye damage.
Keep respiratory tract clear. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Take victim immediately to hospital.
Symptoms: May cause damage to organs if swallowed.
Immediate Medical Attention
Consult a physician. Take victim immediately to hospital.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
In case of fire, use water spray (fog), foam or dry chemical.
Carbon dioxide (CO2), High volume water jet
Do not allow run-off from fire fighting to enter drains or water courses.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Avoid dust formation. Avoid breathing dust.
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.
Neutralize with chalk, alkali solution or ammonia.
Materials: chalk, alkali solution or ammonia
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid dust formation. Protect from moisture. Avoid formation of respirable particles. Do not breathe vapours/dust. Avoid contact with skin and eyes. For personal protection see section 8.
Protect from moisture. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Keep in a dry place. Stable under recommended storage conditions.
Smoking, eating and drinking should be prohibited in the application area. When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.
Avoid dust formation.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No specific test data related to reactivity available for this product or its ingredients.
Under normal conditions of storage and use, hazardous reactions will not occur. Dust may form explosive mixture in air.
Exposure to moisture
Incompatible with acids. Combustible material, Oxidizing agents, Strong bases, brass, Cyanides, Copper, Halogenated compounds, Metal salt.
Oxygen, Chlorine, Sulphur oxides, Hypochlorites
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for VIRKON S?
The signal word is danger.
What is the physical form of VIRKON S?
VIRKON S is a solid appearing as powder with pink color. It has pleasant, sweet odor.
What is VIRKON S used for?
Disinfectants
What are the hazard statements for VIRKON S?
This substance has 4 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H371: May cause damage to organs if swallowed.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of VIRKON S?
The melting point is No data available Biocides Authorization not required and the boiling point is No data available Biocides Authorization not required.