Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 3M Unitek Multi-Cure Glass Ionomer Orthodontic Band Cement Powder
- Product Code
- 712-051
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Orthodontic use
Manufacturers & Suppliers
3M, Oral Care Solutions Division
manufacturer
3M Center, St. Paul, MN 55144-1000, USA
1-888-3M HELPS (1-888-364-3577)
Emergency Contacts
Emergency Contact
1-800-364-3577
24 hours
Emergency Contact
(651) 737-6501
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| SILANE TREATED GLASS | --- | 95 - 100% | No |
| POTASSIUM PERSULFATE | 7727-21-1 | 0.2% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air. If you feel unwell, get medical attention.
Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention.
Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention.
Rinse mouth. If you feel unwell, get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Material will not burn.
None inherent in this product.
Firefighter Protection
No special protective actions for fire-fighters are anticipated.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate area. Ventilate the area with fresh air.
For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice.
Avoid release to the environment.
Collect as much of the spilled material as possible. Use wet sweeping compound or water to avoid dusting. Sweep up. Place in a closed container approved for transportation by appropriate authorities. Clean up residue. Seal the container.
Materials: wet sweeping compound or water
Related Products
Similar products with comparable safety profiles
Dentsply IRM Powder
---
3M Unitek Transbond XT Primer
---
3M Unitek Transbond XT Primer
---
Dentsply IRM Liquid
---
IRM® LIQUID - Zinc Oxide Eugenol Intermediate Restorative Material
---
3M™ Polyether Adhesive - New Formulation
---
3M™ Polyether Adhesive - New Formulation
---
Loctite(R) 3103 Adhesive Flexible UV Curing
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid breathing dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse. A no-touch technique is recommended. If skin contact occurs, wash skin with soap and water. If product contacts glove, remove and discard glove, wash hands immediately with soap and water and then re-glove.
No special storage requirements.
Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse. If product contacts glove, remove and discard glove, wash hands immediately with soap and water and then re-glove.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use in a well-ventilated area.
See Section 7.1 for additional information on skin protection.
Safety Glasses with side shields
None required.
See Section 7.1 for additional information on skin protection.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
Hazardous polymerization will not occur.
Light
None known.
None known. Refer to section 5.2 for hazardous decomposition products during combustion.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste product in a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste incineration facility.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Contact 3M for more information.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 3M Unitek Multi-Cure Glass Ionomer Orthodontic Band Cement Powder?
The signal word is danger.
What is the physical form of 3M Unitek Multi-Cure Glass Ionomer Orthodontic Band Cement Powder?
3M Unitek Multi-Cure Glass Ionomer Orthodontic Band Cement Powder is a solid appearing as light blue color, cherry odor with light blue color. It has cherry odor odor.
What is 3M Unitek Multi-Cure Glass Ionomer Orthodontic Band Cement Powder used for?
Orthodontic use
What are the hazard statements for 3M Unitek Multi-Cure Glass Ionomer Orthodontic Band Cement Powder?
This substance has 2 hazard statements:
- H317: May cause an allergic skin reaction.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
What is the melting point of 3M Unitek Multi-Cure Glass Ionomer Orthodontic Band Cement Powder?
The melting point is No Data Available and the boiling point is No Data Available.